We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular USB-C adapter with right-angled plug, matte black finish

Fervit

Fervit Rectangle Jack 140W 100W 90° USB-C PD Adapter

SKU CH-CXV6-5R51Z

A 90-degree USB-C adapter converts 18-20 V DC input into 140 W max output with multiple PD profiles

  • Delivers up to 140W power with built-in PD trigger
  • Accepts 18V-20V input from 135W or 140W chargers
  • 90° angled plug fits tight spaces around ports
  • Supports 5V, 9V, 15V, 20V output profiles for 65W, 100W, 140W devices
  • Compatible with QC 2.0, QC 3.0 and USB PD standards

Angled USB-C Power Adapter

This Fervit adapter converts a rectangular 140 W DC input into a 90-degree USB-C output. It contains a built-in PD trigger that negotiates up to 140 W (20 V/7 A) from compatible chargers. The right-angle plug fits tight clearances around laptop ports. It supports PD and QC 2.0/3.0 protocols for broad device compatibility.

For Slim-Port Laptops, Not Barrel-Only Machines

It suits owners of USB-C laptops, tablets or phones that accept 65 W, 100 W or 140 W PD profiles and need a low-profile connector. Buyers whose devices charge only through a proprietary barrel jack cannot use this adapter. Users without a 135 W or 140 W PD source will not reach the maximum output rating.

140 W DC Input Requirement

The adapter requires an 18 V–20 V DC source rated at 140 W to deliver its full 20 V/7 A output. Lower-wattage chargers will limit the available power profiles to 100 W, 65 W or below. Verify your charger voltage and current match the 140 W input specification before connecting.

Highlights

  • Delivers up to 140W power with built-in PD trigger
  • Accepts 18V-20V input from 135W or 140W chargers
  • 90° angled plug fits tight spaces around ports
  • Supports 5V, 9V, 15V, 20V output profiles for 65W, 100W, 140W devices
  • Compatible with QC 2.0, QC 3.0 and USB PD standards

Specifications

BrandFervit

Questions about this item

What charger wattage do I need to supply the adapter's 140W input?

Use a 135W or 140W charger that delivers DC 18V-20V to meet the adapter's 140W input requirement.

Will this adapter negotiate 65W or 100W for my older laptop that only supports those levels?

Yes, the adapter outputs 5V/2A, 9V/3A, 15V/2A, 20V/3.25A, 20V/5A and 20V/7A, so it will negotiate 65W or 100W with compatible devices.

How can I confirm the adapter is delivering the correct voltage after I plug it in?

Check your device's charging indicator or battery settings to verify it shows the expected voltage such as 20V and current like 3.25A or 5A.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.