We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 M-key slot and Oculink SFF-8612 connector

Fervit

Fervit PCI-E 3.0 M.2 M-Key to Oculink SFF-8612 SFF-8611 Host Adapter for PCIe Nvme SSD 2260 hard drive adapter

SKU CH-BPCG-VANXD

Adds an Oculink SFF-8612 port for NVMe SSDs via PCIe 3.0 M.2 M-Key slot

  • Expands system with one SFF-8612 interface for additional NVMe storage
  • Connect an NVMe SSD using an optional Oculink SFF-8611 cable
  • PCIe 3.0 M.2 M-Key host adapter fits 2260 form factor drives
  • Compatible with Linux Kernel 4.3 or above for broad OS support
  • Works with Windows 8.1, 10 and 64-bit versions for easy setup

Host Adapter for PCIe NVMe SSD

This Fervit host adapter adds a single Oculink SFF-8612 interface to a system through a PCIe 3.0 M.2 M-Key slot. It enables connection of one NVMe SSD using an optional cable. The adapter supports Linux Kernel 4.3 or above and Windows 8.1, Windows 10, and their 64-bit variants.

Build Integration and Expansion

The card fits into an available M.2 M-Key slot and provides one SFF-8612 port for external drive attachment. An optional cable is required to link the SSD. This arrangement frees internal drive bays and standard expansion slots for other components.

Sustained Load Behaviour

The adapter operates on the PCIe 3.0 electrical interface, maintaining a consistent link for the attached NVMe SSD. It supports the listed operating systems without additional drivers. Builders needing multiple drive connections or a different host interface should consider other solutions.

Highlights

  • Expands system with one SFF-8612 interface for additional NVMe storage
  • Connect an NVMe SSD using an optional Oculink SFF-8611 cable
  • PCIe 3.0 M.2 M-Key host adapter fits 2260 form factor drives
  • Compatible with Linux Kernel 4.3 or above for broad OS support
  • Works with Windows 8.1, 10 and 64-bit versions for easy setup

Specifications

BrandFervit

Questions about this item

Will the PCIe 3.0 x4 link limit sustained throughput on this adapter?

The adapter uses a PCIe 3.0 connection so the link itself sets the maximum sustained bandwidth.

Does the board generate noticeable heat or noise during all-day operation?

The adapter has no active cooling and no moving parts so it runs silently with minimal heat.

What cable and drive do I need to use this adapter?

You need an Oculink SFF-8612 cable and an M.2 2260 NVMe SSD to connect a drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.