We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board adapter connecting a small 2230 NVME slot to a longer 2280 NVME slot

Fervit

Fervit NVME 2230 to 2280 Extension Adapter for ROG Flow X13

SKU CH-JBGK-44ATR

Connects a 2280 NVME SSD to the 2230 slot of ROG Flow X13 2021-2023 models using a PCI-Express 4.0 x4 adapter

  • Enables standard 2280 NVME drives in 2230 slots
  • PCI-Express 4.0 x4 bandwidth preserves full SSD speed
  • Fits ROG Flow X13 2021-2023 models directly
  • No NVME-to-SATA or SATA-to-NVME conversion performed
  • Install in about 20 minutes with basic tools

Adapter for ROG Flow X13 2230 to 2280 NVME

This Fervit adapter lets owners of the ROG Flow X13 gaming laptop replace the factory 2230 NVME drive with a longer 2280 NVME module. It bridges the shorter slot to the larger form factor so you can install higher-capacity storage. The part is designed for the 2021 to 2023 model years of this device.

PCIe 4.0 x4 interface limits

The adapter passes a PCI-Express 4.0 x4 signal from the laptop slot to the 2280 SSD. It does not convert NVME to SATA and it cannot convert a SATA drive to NVME. Only NVME drives with an M-Key pinout will function. The electrical connection is limited to the lanes and protocol provided by the host slot.

Check your laptop model and drive type

Verify that your unit is a ROG Flow X13 from the 2021 to 2023 range before ordering. Confirm the existing drive is a 2230 NVME module, not a SATA variant. You will need a separate 2280 NVME SSD and the ability to clone the system onto it before performing the physical swap.

Highlights

  • Enables standard 2280 NVME drives in 2230 slots
  • PCI-Express 4.0 x4 bandwidth preserves full SSD speed
  • Fits ROG Flow X13 2021-2023 models directly
  • No NVME-to-SATA or SATA-to-NVME conversion performed
  • Install in about 20 minutes with basic tools

Specifications

BrandFervit

Questions about this item

Which adapter version fits the ROG Flow X13 2230 slot?

This Fervit adapter converts the laptop's 2230 M-key NVME slot to accept a full-length 2280 NVME drive using a PCI-Express 4.0 x4 connection.

What does the PCI-Express 4.0 x4 link mean for real-world SSD speed?

The adapter passes the full PCI-Express 4.0 x4 bandwidth to the installed 2280 NVME drive so it can run at its rated sequential read and write limits.

Does the adapter support SATA M.2 drives or only NVME?

It works exclusively with NVME M-key drives; it cannot convert NVME to SATA or SATA to NVME.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.