We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with microSD slot and mSATA edge connector

Fervit

Fervit MSATA 30x50mm to Micro SD TF Card Adapter

SKU CH-E8NE-78FAZ

Converts a microSD card into an mSATA 30x50mm SSD with SATA 1.5 and 3.0 Gbps speeds up to 300 MB/s

  • Converts micro SD cards to MSATA SSD format for industrial data mobility
  • SATA Gen1 and Gen2 support delivers 150 MB/s and 300 MB/s transfer rates
  • Driver-free plug-and-play operation with BIOS and OS compatibility
  • Fits standard 50 mm MSATA slots in desktops and notebooks
  • LED indicator confirms normal TF card data reading after power-on

MSATA 30x50mm to Micro SD Adapter

This Fervit adapter converts a micro SD TF card into an MSATA solid-state drive. It fits the 30x50mm MSATA form factor and works in desktops and notebooks. The board connects to a SATA interface and supports SATA Gen1 and Gen2 link speeds. No driver is required for BIOS or operating system recognition.

For mobile storage on legacy SATA slots

It suits technicians who need removable storage on systems with an MSATA socket and want to use high-speed TF cards. The adapter is not compatible with mini PCI-E slots and does not support hot-plugging of either the TF card or the MSATA connection. Builders needing a mini PCI-E interface or hot-swap capability should look at something else.

SATA Gen1 and Gen2 compatibility

The adapter runs at 1.5 Gbps and 3.0 Gbps, delivering up to 150 MB/s and 300 MB/s respectively. This SATA generation support is the specification that determines whether the card matches the host system.

Highlights

  • Converts micro SD cards to MSATA SSD format for industrial data mobility
  • SATA Gen1 and Gen2 support delivers 150 MB/s and 300 MB/s transfer rates
  • Driver-free plug-and-play operation with BIOS and OS compatibility
  • Fits standard 50 mm MSATA slots in desktops and notebooks
  • LED indicator confirms normal TF card data reading after power-on

Specifications

BrandFervit

Questions about this item

What is the maximum sustained data rate this adapter can deliver when paired with a SATA Gen2 host?

The adapter reaches 300 MB/s with a SATA Gen2 link running at 3.0 Gbps.

Does the adapter generate noticeable heat or draw extra power during continuous all-day operation?

It is a passive board with no active components, so it adds no measurable heat or power draw beyond the micro SD card itself.

What must already be installed in the system for this adapter to function?

A free mSATA slot wired for SATA GEN1 or Gen2 and a micro SD card are required; the board does not work in a mini PCIe socket.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.