Fervit Mini USB B 5-pin 90° Left Angled to USB 2.0 Male Cable 500cm with Ferrite Core

Tight-space Mini USB B cable

This five-metre cable ends in a 90-degree left-angled Mini USB B 5-pin plug that reaches ports blocked by chassis walls or adjacent connectors. The straight USB 2.0 Type-A plug at the other end fits any standard host port. It is built for legacy peripherals such as older printers, scanners, external drives or industrial equipment that still use the Mini B interface. Buyers needing a right-angled exit, a shorter run or a Micro USB connector will not be served by this model.

Build integration and clearance gains

The angled head lets the cable run parallel to the device panel instead of projecting straight out, freeing vertical space behind cramped desks or inside equipment racks. A moulded ferrite core near the Type-A end suppresses high-frequency noise on the data lines without requiring an external filter. The 500 cm length bridges floor-standing PCs to bench-top instruments while avoiding the clutter of shorter cables. No driver installation is needed; the link enumerates as a standard USB 2.0 device.

Thermals noise and power draw

Passive copper conductors and the ferrite bead add no active cooling requirement and generate no audible noise during operation. The assembly draws only the bus power negotiated by the connected peripheral, staying within the 500 mA limit defined by the USB 2.0 specification. Signal integrity is rated for 480 Mbps high-speed transfers, so sustained bulk-endpoint traffic does not raise connector temperature above ambient. The PVC jacket resists kinking during repeated routing.