We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Fervit

Fervit Mini SAS SFF8088 Male to 4×SATA Female Breakout Cable 1M 3.3FT

SKU CH-0551-NQ4DB

Connects a 26-pin SFF8088 SAS host to four SATA drives with latched connectors for stable enterprise storage wiring

  • Connect four SATA drives with one SFF8088 port
  • Latch-equipped connectors keep links secure under vibration
  • 3 ft length suits internal and external server wiring
  • Rugged build reduces signal loss and crosstalk
  • Supports high-speed data transfer for multi-drive arrays

SAS Breakout Cable for Server Storage

This Fervit cable splits a single Mini SAS SFF8088 male port into four SATA 4-pin female connectors. It is designed for administrators wiring multi-drive arrays between a SAS host or controller and a SATA backplane. The 1 metre length supports flexible routing inside or outside a server chassis. Secure latches on each connector maintain a stable link under vibration.

Suits SAS-to-SATA Backplane Wiring

Installers building or servicing enterprise storage enclosures will find the 1-to-4 breakout layout matches typical backplane pinouts. The rugged construction reduces signal loss and crosstalk across all four lanes. Buyers who need a different pin count, an alternative connector gender, or a cable without latches should choose another product.

26-Pin SFF8088 Male Interface

The cable terminates in a 26-pin SFF8088 male plug that mates directly with standard Mini SAS controller ports. This connector defines compatibility with the host side of the link. Verify that your controller or HBA presents an SFF8088 receptacle before purchase.

Highlights

  • Connect four SATA drives with one SFF8088 port
  • Latch-equipped connectors keep links secure under vibration
  • 3 ft length suits internal and external server wiring
  • Rugged build reduces signal loss and crosstalk
  • Supports high-speed data transfer for multi-drive arrays

Specifications

BrandFervit

Questions about this item

Does the cable include the SATA power cables for the four drives?

The breakout provides only the 26-pin SFF8088 male to four SATA 4-pin female data connections; separate SATA power cables are required for each drive.

Which SAS controller port does the 8088 male connector fit?

The SFF8088 male end plugs into a standard external Mini SAS 26-pin port on a SAS host bus adapter or RAID controller.

What data rate can I expect on each of the four SATA links?

Each lane carries the full SAS lane speed, so every attached SATA drive runs at its native SATA 6 Gb/s rate without sharing bandwidth.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.