We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short .5M breakout cable with SFF-8088 26P connector splitting to four SATA 7P ports, black finish

Fervit

Fervit Mini SAS HD SFF-8088 26P to 4×SATA 7P Cable .5M 28AWG 10 Ohm

SKU CH-0ETR-MBT50

Converts a single Mini SAS HD SFF-8088 26P port to four SATA 7P connections for multi-drive server expansion at 6Gbps with 10 Ohm impedance matching and .5M 28AWG construction

  • Converts one Mini SAS HD 26-pin port to four SATA 7-pin ports for multi-drive expansion
  • 10 Ohm impedance matching stabilises signal integrity during high-speed data transmission
  • Supports 6 Gbps SAS-compatible transfer for enterprise HDDs, SSDs and RAID storage systems
  • 28 AWG high-conductivity copper wire reduces signal loss and crosstalk
  • 5 m compact length enables tidy short-range routing inside rackmount servers and enclosures

4×SATA breakout from Mini SAS HD

This 0.5 metre cable splits one external-style SFF-8088 26-pin Mini SAS HD connector into four SATA 7-pin female ports, letting a single controller port address up to four drives. It is built with 28AWG copper conductors and 10 ohm impedance matching for signal integrity at 6 Gbps SAS-compatible speeds.

Suits rack-mount servers and storage enclosures

The short length keeps cable runs tidy inside 1U or 2U chassis where space is tight. Builders needing longer reach between separate enclosures or external JBODs should look at something else, as this cable is intended for short-range internal routing only.

SFF-8088 26-pin Mini SAS HD host port required

The cable plugs directly into an SFF-8088 26-pin Mini SAS HD receptacle on a host bus adapter, RAID card or backplane; without that specific port the cable cannot be used.

Highlights

  • Converts one Mini SAS HD 26-pin port to four SATA 7-pin ports for multi-drive expansion
  • 10 Ohm impedance matching stabilises signal integrity during high-speed data transmission
  • Supports 6 Gbps SAS-compatible transfer for enterprise HDDs, SSDs and RAID storage systems
  • 28 AWG high-conductivity copper wire reduces signal loss and crosstalk
  • 5 m compact length enables tidy short-range routing inside rackmount servers and enclosures

Specifications

BrandFervit

Questions about this item

What comes in the box and do I need to buy anything else to connect four SATA drives?

The cable itself provides one SFF-8088 26-pin Mini SAS HD connector and four SATA 7-pin female ports, so no extra adapters are required for the drive ends.

Which length and wire gauge should I choose for a short rack run?

This version is .5M long and built with 28AWG copper wire, suited for compact internal routing between a controller and up to four drives.

What does the 6Gbps rating mean when the cable is installed in a server?

It supports SAS-compatible 6Gbps transfer per lane, with 10-ohm impedance matching to maintain signal integrity across all four SATA connections.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.