We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board adapter with right-angled flexible ribbon cable and USB connector

Fervit

Fervit Mini PCI-E to PCI-E 1X Extension Cord Adapter Card with USB Riser Card

SKU CH-S19M-RFC00

Connects a PCIe x1 card to a Mini PCIe slot via a flexible 90-degree FFC cable with USB 2.0 480 Mbps support

  • High-speed data transfer up to 480Mbps via USB 2.0 Hi-Speed
  • Complies with PCI Express CEM Specification 1.1 for reliable slot compatibility
  • Extremely soft and compact flexible FFC cable simplifies internal routing
  • 90-degree cable assembly enables easy mounting in tight cases
  • High-quality solder points and plated contacts ensure best conductivity and long use

Compact PCI-E 1X riser for embedded builds

This Fervit adapter converts a Mini PCI-E slot into a full-size PCI Express 1X connection using a flexible flat cable. It targets system integrators and hobbyists adding expansion cards to small-form-factor or industrial boards where a standard riser will not fit. The USB 2.0 interface on the riser board supplies auxiliary power for the attached card.

Verify slot type and power budget before ordering

Confirm the host board provides a Mini PCI-E socket wired for PCI Express signalling, not mSATA or USB-only. The riser draws its primary power through that socket, while the onboard USB 2.0 connector supplements delivery; ensure your platform can supply the combined load of the adapter plus the target expansion card.

90-degree FFC cable eases tight-case routing

The flat flexible cable is assembled at a 90-degree angle to the base board, allowing it to fold cleanly along the chassis without sharp bends. High-quality solder joints and plated contacts maintain signal integrity to the CEM 1.1 specification, while the soft FCC construction resists fatigue during repeated assembly and service cycles.

Highlights

  • High-speed data transfer up to 480Mbps via USB 2.0 Hi-Speed
  • Complies with PCI Express CEM Specification 1.1 for reliable slot compatibility
  • Extremely soft and compact flexible FFC cable simplifies internal routing
  • 90-degree cable assembly enables easy mounting in tight cases
  • High-quality solder points and plated contacts ensure best conductivity and long use

Specifications

BrandFervit

Questions about this item

What is included in the box and do I need to buy anything else?

The package contains the Mini PCI-E adapter board, the USB riser board and the flexible FFC cable. No extra parts are required for installation.

Which specification version should I match to my motherboard slot?

The adapter follows PCI Express CEM 1.1 and USB 2.0 Hi-Speed, so choose a board with a Mini PCI-E slot that supports those revisions.

What does the 480 Mbps figure mean once the card is installed?

It is the theoretical maximum throughput of the USB 2.0 link; real-world transfer rates will be lower due to protocol overhead and system load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.