We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular enclosure with USB 3.0 port for 1.8 inch mSATA drive

Fervit

Fervit Mini PCI-E mSATA to USB 3.0 Adapter Card with Enclosure

SKU CH-90RS-2BT4Q

Converts a 1.8 inch mSATA drive into a USB 3.0 external SSD reaching 200 MB/s

  • Turn any mSATA drive into a fast portable SSD
  • Fits standard 1.8" mSATA drives
  • Real-world transfer speeds up to 200 MB/s over USB 3.0
  • Only works with mSATA connectors, not Mini PCI-e SATA or PATA
  • Compact enclosure makes the drive easy to carry

Build your own external SSD

This Fervit adapter lets you turn a standard 1.8" mSATA drive into a USB 3.0 external solid-state drive. The package includes the converter card and a matching enclosure so the assembly is ready to use. Real-world transfer rates can reach 200 MB/s by saturating the USB 3.0 bus. It is a compact, portable way to reuse an existing mSATA module.

Check drive compatibility first

The card only accepts drives with an mSATA connector. It will not work with 50mm Mini PCI-e SATA or Mini PCI-e PATA modules even though they look similar. Verify that your drive is the standard 1.8" mSATA form factor before ordering. No other interface or drive type is supported by this adapter.

Replaces a basic USB flash drive

Moving from a typical USB 3.0 flash drive to this mSATA-based SSD gives much higher sustained throughput for large file transfers. The upgrade is worthwhile when you already own a compatible mSATA drive and need faster portable storage. If you do not have an mSATA drive or require a different interface, this kit will not meet the need.

Highlights

  • Turn any mSATA drive into a fast portable SSD
  • Fits standard 1.8" mSATA drives
  • Real-world transfer speeds up to 200 MB/s over USB 3.0
  • Only works with mSATA connectors, not Mini PCI-e SATA or PATA
  • Compact enclosure makes the drive easy to carry

Specifications

BrandFervit

Questions about this item

What comes in the box and do I need to buy an mSATA drive separately?

The adapter card and enclosure are included. You must supply your own 1.8 inch mSATA drive.

Which mSATA drives will fit this adapter?

It accepts standard 1.8 inch mSATA drives with an mSATA connector. It will not work with 50 mm Mini PCI-e SATA or Mini PCI-e PATA modules.

What real-world transfer speed can I expect over USB 3.0?

Sequential reads and writes can reach up to 200 MB/s, limited by the USB 3.0 bus.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.