Fervit
Fervit Micro USB 2.0 Male to Male Cable 100cm
Connects two Micro USB devices for data transfer at up to 480Mbps and charging up to 5V 2A over a 100cm cable
- Charges phones, tablets and small USB devices
- Transfers data at up to 480Mbps with USB 2.0
- 5-pin fully wired connectors carry power and data
- 100cm length gives flexible reach
- Plug-and-play with any Micro USB port
Micro USB 2.0 Male-to-Male Cable
This 100cm cable connects two devices that both use Micro USB 5-pin ports. It carries data and power through five internal wires and is rated for USB 2.0 speeds up to 480Mbps. The plug-and-play design requires no drivers and suits phones, tablets, OTG accessories and small USB-powered appliances. Buyers needing a direct link between two Micro USB sockets will find it fits the task.
Replaces Shorter or Damaged Micro USB Links
Use this cable when the original lead is too short, frayed or lost and you need a full 100cm reach between two Micro USB 2.0 ports. The jump is worth it if you must extend a charging or data connection without adding a female coupler. It does not convert to USB-A, USB-C or any other connector, so it cannot bridge different port types.
Check Both Ports Are Micro USB 5-Pin Before Ordering
Verify that each device presents a Micro USB 2.0 5-pin male receptacle; the cable will not fit Mini USB, USB-C or proprietary sockets. Confirm the host can supply up to 5V 2A if you plan to charge power-hungry accessories. Ensure the 100cm length suits the physical layout, as no other lengths are offered in this listing.
Highlights
- Charges phones, tablets and small USB devices
- Transfers data at up to 480Mbps with USB 2.0
- 5-pin fully wired connectors carry power and data
- 100cm length gives flexible reach
- Plug-and-play with any Micro USB port
Specifications
| Brand | Fervit |
|---|
Questions about this item
How much space does the 100cm cable need for routing?
The cable is 100cm long with Micro USB 5-pin male connectors on both ends, so allow enough slack for the 100cm run plus connector clearance at each device.
What is the correct way to plug in the Micro USB 5-pin male connectors for data and charging?
Align the shaped Micro USB 5-pin male plug with the device port and insert gently until seated; the cable carries five wires for both charge and data sync, so orientation matters.
When should the cable be replaced if the 480Mbps throughput or 5V 2A charging becomes unreliable?
Replace the cable if you notice intermittent data transfer at 480Mbps, slow charging at 5V 2A, loose connector fit, or visible damage to the 100cm cable jacket or plugs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



