We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five Micro USB 2.0 male plugs with 13mm PCB mount tabs

Fervit

Fervit Micro USB 2.0 Male Plug 13mm PCB Mount 5pcs

SKU CH-S5A5-MGAC4

Set of five 13 mm Micro USB 2.0 male plugs for PCB-mount power-only connections up to 5 V 2 A

  • Power-only charging up to DC 5V 2A
  • 13 mm PCB-mount footprint for compact builds
  • Solder-type assembly enables custom cable creation
  • Micro USB 2.0 male plug fits standard ports
  • Pack of five connectors for multiple projects

DIY Micro USB 2.0 Power Connector

This set provides five male Micro USB 2.0 plugs designed for PCB mounting and solder assembly. Each connector measures 13 mm in length and is intended for builders creating custom power cables or repairing device ports. The plugs support power delivery only, with no data lines connected.

Power-Only Thermal and Current Profile

The connectors are rated for up to DC 5 V at 2 A when used with a USB 2.0 power source and device. Because only the power pins are active, there is no data signalling circuitry to generate additional heat during operation. Normal use stays within the specified current limit without active cooling.

Two-Pin Power Limitation

Only two pins are connected inside each plug, so data transfer is not supported. Buyers who need a full USB 2.0 interface with data and power combined should look for a different connector type.

Highlights

  • Power-only charging up to DC 5V 2A
  • 13 mm PCB-mount footprint for compact builds
  • Solder-type assembly enables custom cable creation
  • Micro USB 2.0 male plug fits standard ports
  • Pack of five connectors for multiple projects

Specifications

BrandFervit

Questions about this item

How do I solder the 13 mm Micro USB 2.0 male plug to a PCB?

Align the through-hole pins with the board pads, apply flux, then solder each pin quickly to avoid overheating the plastic housing.

Will the gold-plated contacts need cleaning or replacement over time?

The contacts are rated for standard mating cycles; occasional dry brushing removes dust, and no scheduled replacement is required.

At what current does the 5 V power path hit its limit during continuous charging?

The connector is specified for up to 2 A at 5 V, so sustained loads above that will exceed its rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.