We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fervit MCIO 4X to U.2 SFF-8639 NVME PCIe cable 50cm

Fervit

Fervit MCIO 4X to U.2 SFF-8639 NVME PCIe Cable 50cm

SKU CH-FVP1-0W94Y

Connects an MCIO 4X host port to a U.2 SFF-8639 NVME drive over 50 cm, supporting PCIe 3.0, 4.0 and 5.0 x4 plus SAS 3.0 and 4.0

  • Connects MCIO 4X host to U.2 SFF-8639 NVME SSD
  • Supports PCIe 5.0, 4.0 and 3.0 x4 signalling
  • Handles SAS 3.0 and 4.0 plus 25G Ethernet traffic
  • 50cm length fits server and workstation chassis
  • 56GT/s PAM4 rating preserves signal integrity

MCIO 4X to U.2 NVMe PCIe Cable

This 50cm cable connects a mainboard MCIO 4X port to a U.2 SFF-8639 NVMe SSD. It transmits PCIe signals using the 4x protocol and supports PCIe 5.0, 4.0 and 3.0 x4. The cable is designed for high-performance networking and server equipment.

Suits builders adding U.2 storage via MCIO

The cable works with Intel SSD 750 M.2 and MCIO 4x configurations. It supports SAS 3.0 and 4.0 alongside 25G Ethernet and 56GT/s PAM4 signalling. Builders who need an included adapter card or a different cable length should look elsewhere.

Single specification that decides fit

The MCIO 4X to U.2 SFF-8639 connector pairing determines compatibility. Your mainboard must provide an MCIO 4X interface and your drive must use the U.2 SFF-8639 form factor. Without this exact match the cable cannot function.

Highlights

  • Connects MCIO 4X host to U.2 SFF-8639 NVME SSD
  • Supports PCIe 5.0, 4.0 and 3.0 x4 signalling
  • Handles SAS 3.0 and 4.0 plus 25G Ethernet traffic
  • 50cm length fits server and workstation chassis
  • 56GT/s PAM4 rating preserves signal integrity

Specifications

BrandFervit

Questions about this item

What motherboard connector is required for the MCIO 4X end of this cable?

The cable needs a motherboard or controller with an MCIO 4X port that carries PCIe 5.0/4.0/3.0 x4 signals.

Can I attach a legacy U.2 drive that only supports PCIe Gen 3 to this cable?

Yes, the cable transmits PCIe x4 and is backward compatible with PCIe 3.0, 4.0 and 5.0 devices.

How do I verify the link is running at PCIe 5.0 x4 after connecting an NVME SSD?

Check the negotiated link speed and width in the OS device manager or with a tool such as lspci -vv.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.