We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with gold edge connector, flexible ribbon cable and SATA power lead

Fervit

Fervit M.2 NVMe to PCIe 4.0 riser adapter for 2260 2280

SKU CH-DAAC-VH02B

Converts an M.2 NVMe slot into a PCIe x1, x4, x8 or x16 slot for 2260 and 2280 drives, includes a SATA power cable and operates at PCIe 3.0, 2.0 or 1.0 speeds

  • Converts M.2 NVMe slot to PCIe X4, X8, X1 or X16
  • Includes 12V/5V SATA power cord for connected operation
  • Ultra-thin foldable PCB with gold-plated fingers for reliable conductivity
  • PCIe 4.0 backwards compatible with 3.0, 2.0, 1.0
  • Supports M.2 2260 and 2280 form factors

M.2 NVMe to PCIe 4.0 adapter for 2260

This Fervit adapter converts an M-key M.2 NVMe slot on the motherboard into a PCIe slot. It accepts M.2 2260 and 2280 form factors and connects PCIe x4, x8, x1 or x16 cards. The actual transfer speed depends on the host M.2 interface.

Installation requires powered-off motherboard

A 12V/5V SATA power cord is included and supplies power only when connected. The ultra-thin, foldable PCB uses high-TG material with gold-plated fingers for reliable contact. The adapter does not support hot-plugging and must be installed with the motherboard powered off.

Sustained operation limited by host M.2 interface

The PCIe 4.0-labelled slot is backwards compatible with PCIe 3.0, 2.0 and 1.0 but cannot deliver PCIe 4.0 throughput. Bandwidth under continuous load will match the speed of the source M.2 connection rather than the slot's maximum label.

Highlights

  • Converts M.2 NVMe slot to PCIe X4, X8, X1 or X16
  • Includes 12V/5V SATA power cord for connected operation
  • Ultra-thin foldable PCB with gold-plated fingers for reliable conductivity
  • PCIe 4.0 backwards compatible with 3.0, 2.0, 1.0
  • Supports M.2 2260 and 2280 form factors

Specifications

BrandFervit

Questions about this item

How can I verify the Fervit M.2 to PCIe adapter is working correctly after installation?

The motherboard should detect a connected PCIe device in BIOS or the operating system device manager at the speed supported by the M.2 slot, up to PCIe 3.0.

What is included with the Fervit adapter and what must I provide separately?

The package includes a 12V/5V SATA power cord. You must supply a compatible M.2 NVMe drive and a motherboard with an M-key M.2 slot for 2260 or 2280 form factors.

Which M.2 drive sizes does the Fervit riser adapter support?

The adapter supports M.2 2260 and 2280 form factors in M-key NVMe configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.