We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter with silver heatsink, 90 by 32 mm

Fervit

Fervit M.2 NVMe to PCIe 3.0 x16/x8/x4 Adapter with Heatsink 90x32mm

SKU CH-2HZ7-6JEP9

Adds an M-key NVMe SSD to a PCIe 3.0 x16, x8 or x4 slot, includes a 90×32 mm heatsink

  • Fits 1U/2U servers with 90x32mm low-profile design
  • Adds NVMe storage via PCIe 3.0 x16/x8/x4 slot
  • Heatsink keeps M.2 SSD cool under load
  • Works with Windows 7/8/10 and Linux systems
  • M-Key NVMe only — SATA drives not supported

Fervit M.2 NVMe PCIe 3.0 Adapter

The Fervit adapter lets you install an M-Key NVMe SSD into a PCIe 3.0 x16, x8 or x4 slot. It targets builders upgrading a 1U or 2U server or a low-profile PC where M.2 sockets are missing. SATA-based M.2 drives are not supported, so only NVMe modules will work.

Replacing missing M.2 slots

This card adds NVMe storage to systems that lack an onboard M-Key connector. The upgrade makes sense when the platform has a free PCIe 3.0 lane but no native NVMe support. It will not help if the board already provides a compatible M.2 slot or if the drive uses the SATA protocol.

Sustained load with integrated heatsink

A 90x32 mm heatsink covers the SSD to dissipate heat during long write sessions. The aluminium spreader keeps temperatures lower than a bare card would, reducing the chance of thermal throttling under continuous workloads. Airflow in the chassis still affects the final result.

Highlights

  • Fits 1U/2U servers with 90x32mm low-profile design
  • Adds NVMe storage via PCIe 3.0 x16/x8/x4 slot
  • Heatsink keeps M.2 SSD cool under load
  • Works with Windows 7/8/10 and Linux systems
  • M-Key NVMe only — SATA drives not supported

Specifications

BrandFervit

Questions about this item

What PCIe slot sizes does the 90x32mm adapter card fit?

The adapter uses a PCIe 3.0 x16 edge connector and is compatible with x16, x8 and x4 slots.

Which step is often missed when installing the M-Key NVMe drive onto the adapter?

Secure the drive with the mounting screw before closing the case; the board has no retention clip.

When should the 90x32mm heatsink be cleaned or the thermal pad replaced?

Remove dust from the heatsink fins whenever system airflow drops, and replace the pad if it hardens or tears.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.