Fervit
Fervit Left Angled DisplayPort to DisplayPort Cable 4K 60Hz 90 Degree Silver Sleeve 2M
A left-angled DisplayPort cable supports 4K at 60 Hz with 32.4 Gbps bandwidth and gold-plated connectors for a secure fit
- Smooth 4K video at 60 Hz backed by 32.4 Gbps bandwidth
- Sharp 1440p and 1080p playback through industry-standard throughput
- Reliable gold-plated connectors with welded strain relief resist tug damage
- Lightweight silver aluminium shell and braided sleeve prevent tangles
- Works with most DisplayPort graphics cards and older DP 1.3 or 1.2 ports
90-degree DisplayPort cable for tight spaces
The left-angled connector routes the cable downward or sideways, reducing strain on the port and clearing rear-panel obstructions on desktops, laptops and monitors. Gold-plated contacts and a welded strain-relief collar resist damage from accidental pulls. A silver aluminium shell and woven braid sleeve add durability without stiffness.
Sustained 4K 60 Hz signal integrity
The cable is rated for 32.4 Gbps bandwidth, matching the DisplayPort 1.4 link rate, so a 4K 60 Hz stream remains stable during extended sessions. Backward compatibility with DP 1.3 and 1.2 means lower-resolution displays at 1440p or 1080p also run without dropped frames or sparkles over the full two-metre length.
Length and version ceiling
At two metres the assembly reaches the practical limit for passive copper at the full 32.4 Gbps rate; longer runs would require active optics or a lower link speed. The connector geometry does not add latency, but it does prevent use in ports that are recessed deeper than the angled hood allows. No ethernet channel is carried despite the supplier claim.
Highlights
- Smooth 4K video at 60 Hz backed by 32.4 Gbps bandwidth
- Sharp 1440p and 1080p playback through industry-standard throughput
- Reliable gold-plated connectors with welded strain relief resist tug damage
- Lightweight silver aluminium shell and braided sleeve prevent tangles
- Works with most DisplayPort graphics cards and older DP 1.3 or 1.2 ports
Specifications
| Brand | Fervit |
|---|
Questions about this item
Does the 90-degree angled connector put any strain on the port during all-day use?
The welded connector ends and heavy cable reliefs are built to stop the cable from breaking if it is tugged, so the angled plug stays secure without stressing the port.
My monitor and graphics card both have standard DisplayPort sockets — will this cable plug straight in?
Yes, it carries full-size DisplayPort plugs on both ends and works with any device that has a standard DP input.
Will the cable work with a graphics card that only supports DP 1.2?
It is backward compatible with DP 1.2 and DP 1.3, so it will run 4K at 60 Hz on older cards that support those versions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



