Fervit
Fervit Internal 4 USB 2.0 3.0 Female Panel 9pin 19pin 20pin Baffle Cable PCI Bracket 50cm
Adds four USB 2.0 and 3.0 Type-A ports to a rear bracket via 9-pin, 19-pin and 20-pin motherboard headers with a 50 cm cable
- Adds four USB ports using motherboard 9-pin and 20-pin headers
- Supports USB 3.0 at 5Gbps and USB 2.0 at 480Mbps
- Includes PCI bracket for secure rear-panel mounting
- 50cm cable length reaches most motherboard header locations
- Backward compatible with USB 1.1 low-speed 1.5Mbps devices
Internal USB Panel with PCI Bracket
The Fervit panel adds four type-A ports to a desktop by connecting to motherboard headers. Two ports support USB 3.0 and two support USB 2.0 for mixed peripheral needs. A 50 cm cable links the panel to the headers inside the case. The assembly mounts in a standard rear expansion slot.
Motherboard Header Connections
The cable terminates in 9-pin, 19-pin and 20-pin plugs for USB 2.0 and USB 3.0 headers. No extra power connector is required beyond the motherboard supply. Installing the bracket frees front-panel ports for other uses or cases without front USB. The panel sits flush with the chassis rear once secured.
Sustained Transfer Rates
USB 3.0 ports maintain up to 5 Gbps super-speed throughput during long file moves. USB 2.0 ports hold at 480 Mbps hi-speed for extended sessions. Backward compatibility covers 1.5 Mbps low-speed devices without throttle. The passive cable introduces no active components that could overheat under load.
Highlights
- Adds four USB ports using motherboard 9-pin and 20-pin headers
- Supports USB 3.0 at 5Gbps and USB 2.0 at 480Mbps
- Includes PCI bracket for secure rear-panel mounting
- 50cm cable length reaches most motherboard header locations
- Backward compatible with USB 1.1 low-speed 1.5Mbps devices
Specifications
| Brand | Fervit |
|---|
Questions about this item
Will the 5 Gbps USB 3.0 ports drop to 480 Mbps if the motherboard only has a 9-pin header?
Yes, the 9-pin header carries USB 2.0 signals limited to 480 Mbps, so all four ports run at USB 2.0 speed.
Does the cable or bracket generate noticeable heat when all four ports transfer data continuously?
The passive cable and metal bracket have no active components, so they produce no measurable heat during sustained transfers.
Which motherboard headers must be free to use all four ports at USB 3.0 speed?
A single 20-pin USB 3.0 header is required; the 9-pin and 19-pin headers are for USB 2.0 fallback.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



