We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat HDMI cable with dual 90° right-up angled connectors, 10cm length, supplied unassembled

Fervit

Fervit HDMI Flat Cable Dual 90° Right-Up Angled 10cm

SKU CH-R6S9-F013P

A 10 cm flat HDMI cable with dual 90° right-up angled connectors for lightweight gimbal use, supplied unassembled

  • Soft flat cable protects light gimbal movement
  • Dual 90° right-up angle fits tight FPV frames
  • 10 cm length keeps drone wiring short
  • Male-to-male HDMI links camera to transmitter
  • Self-assembly lets you route cable before connecting

Fervit HDMI Flat Cable 10 cm

The Fervit HDMI flat cable measures 10 cm and uses dual 90 degree right-up angled Type A male connectors. It is built for brushless gimbal setups where a stiff cable would upset balance. The cable ships as separate cable and connector parts that you assemble yourself.

Suited to lightweight gimbal operators

Pilots who need a short, pliable link between an HDMI camera and a transmitter will benefit from the soft FPC construction. Builders who want a ready-to-use cable or a longer run for fixed installations should look elsewhere because the 10 cm length and self-assembly requirement limit those uses.

Behaviour under sustained load

The flat FPC design stays flexible during continuous gimbal movement so it does not transmit torque to the camera mount. Because the connectors are fitted by the user, long-term reliability depends on careful assembly rather than on factory moulding.

Highlights

  • Soft flat cable protects light gimbal movement
  • Dual 90° right-up angle fits tight FPV frames
  • 10 cm length keeps drone wiring short
  • Male-to-male HDMI links camera to transmitter
  • Self-assembly lets you route cable before connecting

Specifications

BrandFervit

Questions about this item

What devices must already have HDMI ports to use this cable?

Both the video source and the display or recorder must provide a standard HDMI input for the male-to-male connectors to plug in.

Will the 90° angled plugs clear a gimbal-mounted camera that sits close to the frame?

The dual right-up 90° bends route the flat cable upward and away from the gimbal base, reducing leverage on lightweight brushless gimbals.

How can I confirm the cable is working after I assemble the connectors?

Power the camera and display, then verify a stable video signal with no flicker or colour loss across the 10 cm link.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.