We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat HDMI cable with dual 90-degree down-angled connectors, 50cm

Fervit

Fervit Dual 90 Degree Down Angled HDMI Male to Male Flat Cable 50cm

SKU CH-58PQ-VZJ5Z

A 50 cm flat HDMI cable with dual 90-degree down-angled connectors, supplied unassembled for flexible gimbal mounting

  • Dual 90° down-angled connectors fit tight gimbal spaces
  • Ultra-flexible flat cable prevents interference with brushless gimbal movement
  • 50 cm length suits compact multicopter aerial photography builds
  • HDMI Type A male-to-male links camera to HDTV or monitor
  • Supplied as separate cable and connector for custom assembly

Purpose-built gimbal cable

This flat HDMI cable is made for brushless gimbal work on multicopters and aerial photography rigs. The ultra-soft FPC construction prevents the stiffness that can upset lightweight gimbal balance. It carries a standard HDMI Type A signal between a camera and a video transmitter or recorder.

Self-assembly kit

The cable and connectors arrive unassembled so you can route the flat ribbon through tight airframe channels before terminating the ends. An assembly guide is referenced for the termination steps. This approach lets builders keep the cable run as short and clean as the airframe allows.

Fixed 50 cm length

At 50 cm the cable suits compact frames where the camera and video link sit close together. The dual 90-degree down-angled plugs keep the profile low against the gimbal base. Builds needing a shorter 10 cm run or a longer 80 cm reach will require a different length from the same series.

Highlights

  • Dual 90° down-angled connectors fit tight gimbal spaces
  • Ultra-flexible flat cable prevents interference with brushless gimbal movement
  • 50 cm length suits compact multicopter aerial photography builds
  • HDMI Type A male-to-male links camera to HDTV or monitor
  • Supplied as separate cable and connector for custom assembly

Specifications

BrandFervit

Questions about this item

Will the flat cable need replacing if it kinks from repeated gimbal movement?

The flat cable is designed to stay very soft so it does not stiffen the gimbal; inspect it periodically and replace if sharp bends or conductor damage appear.

What length limit applies before signal quality drops on a 50 cm run?

The cable is built for lengths from 10 cm to 80 cm, so a 50 cm assembly stays well within the specified range.

Does the connector assembly generate heat during all-day FPV video streaming?

The passive HDMI Type A male connectors and flat cable carry only the video signal and draw no measurable power, so they remain cool in continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.