We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cable with DisplayPort plug on one end and USB-C plug on the other, 2.0m length

Fervit

Fervit DisplayPort to USB-C Touch Cable 4K 60Hz 2.0m

SKU CH-0AKF-YZYD3

Connects a DisplayPort graphics card to a USB-C touch display at up to 4K 60 Hz over two metres

  • 4K 60 Hz video from a DisplayPort source to a USB-C touch display
  • USB 3.2 DP alt-mode carries video and touch without data or docking functions
  • Works with Windows, macOS, Android and Chrome OS in mirrored or extended modes
  • 0 m cable with reversible USB-C plug needs USB power for operation
  • Directional only — DisplayPort source to USB-C sink, not the reverse

Directional DisplayPort to USB-C cable

This Fervit cable carries a DisplayPort 4K source signal to a USB-C touch-screen sink over a 2.0 metre length. It supports resolutions up to 4K at 60 Hz, 1440p at 60 Hz and 1080p at 60 Hz depending on the host hardware. The connection uses DP Alt Mode on the USB 3.2 specification and requires USB power to operate. Touch input is passed through alongside the video signal.

Works with Windows, macOS, Android and Chrome OS

The cable suits users who need to drive a USB-C touch monitor from a DisplayPort graphics output in mirrored, extended or primary-display modes. It does not support USB-C source to DisplayPort sink direction, nor does it carry USB data, docking or storage functions. Buyers who need a bidirectional cable or data transfer should look elsewhere.

One-way DisplayPort source to USB-C sink only

The connector pair is fixed as a DisplayPort male plug on the source side and a USB-C male plug on the display side. Reversing the ends will not produce a picture because the cable only operates in this single direction.

Highlights

  • 4K 60 Hz video from a DisplayPort source to a USB-C touch display
  • USB 3.2 DP alt-mode carries video and touch without data or docking functions
  • Works with Windows, macOS, Android and Chrome OS in mirrored or extended modes
  • 0 m cable with reversible USB-C plug needs USB power for operation
  • Directional only — DisplayPort source to USB-C sink, not the reverse

Specifications

BrandFervit

Questions about this item

What size DisplayPort connector does the Fervit cable need on the source device?

It requires a standard full-size DisplayPort output on the graphics card or laptop. The plug is not Mini DisplayPort and will not fit that smaller port.

Which end must be plugged in first when setting up the 2.0m cable for touch function?

Connect the DisplayPort male end to the video source, then attach the USB-C end to the touch screen. The cable draws USB power for the touch data channel, so the source must be on.

Will the USB-C connector on this 2.0m cable wear out from frequent unplugging?

The USB-C plug is rated for typical daily connect and disconnect cycles. If the spring tabs loosen over time, replace the cable to keep a reliable touch and video link.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.