Fervit
Fervit DC Switch Cable 5.5x2.1mm Male to Female Power Only
A 5.5×2.1 mm male-to-female power cable with an inline on/off switch for 5 V or 12 V low-power devices
- Built-in on/off button saves wear on the DC jack
- 5 × 2.1 mm male-to-female fits common low-power gear
- Two-core cable delivers 5 V or 12 V DC power only
- No data lines — pure charging for lamps, fans, small devices
- Push-button control avoids repeated plugging and unplugging
Fervit DC Switch Cable 5.5x2.1mm Male to Female
This inline power switch cable connects devices with a 5.5x2.1mm DC barrel jack. It carries only DC power at 5V or 12V and does not transmit USB data. The built-in button lets you toggle power without unplugging the connector. It is intended for low-power peripherals such as LED lamps, small fans or similar 5.5x2.1mm equipment.
Installation and common issues
Plug the male end into your power source and the female end into the device, then press the button to switch power on or off. The cable supports only low-power loads and cannot be used with high-power equipment or PD chargers. Because it lacks data lines, it will not work for devices that require USB communication. Forcing it into an incompatible port may damage the connector.
Compatibility check before ordering
Verify that both your power supply and the target device use a 5.5mm outer diameter and 2.1mm inner diameter barrel connector. Confirm the device operates at 5V or 12V and draws only a low current suitable for a two-core charging cable. Ensure you do not need USB data transfer or fast-charging protocols, as this cable provides neither.
Highlights
- Built-in on/off button saves wear on the DC jack
- 5 × 2.1 mm male-to-female fits common low-power gear
- Two-core cable delivers 5 V or 12 V DC power only
- No data lines — pure charging for lamps, fans, small devices
- Push-button control avoids repeated plugging and unplugging
Specifications
| Brand | Fervit |
|---|
Questions about this item
How do I confirm the switch is controlling power to my DC 5.5x2.1mm device after connecting it?
Press the on/off button and verify the connected device powers on or off immediately; the cable passes only DC power at 5V or 12V with no data lines.
What comes in the package and what must I provide separately?
The package includes the Fervit DC switch cable with 5.5x2.1mm male and female ends; you must supply a compatible DC power source and a device with a matching 5.5x2.1mm input.
Which voltage version should I select for a 5V desk lamp versus a 12V fan?
The same cable handles both 5V and 12V low-power devices; choose it if your lamp or fan uses a 5.5x2.1mm jack and draws within the supported range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



