Fervit
Fervit DC Jack 4.0x1.3mm to USB-C PD Cable 65W
Converts a 4.0×1.3 mm DC jack accepting 15-20 V input into a USB-C PD port delivering up to 65 W (5 V/2 A, 9 V/3 A, 20 V/3.25 A) for laptops, tablets and phones
- Delivers up to 65W from a 4.0x1.3mm DC jack
- Accepts 15-20V input for broad laptop compatibility
- USB-C output supports PD and multiple fast-charge protocols
- Powers Macs, laptops, tablets and phones at 65W
- Verify device voltage and current before use to prevent damage
Purpose and Compatibility
This Fervit cable converts a 4.0×1.3mm DC barrel input into a USB-C Power Delivery output up to 65W. It suits users who need to power a USB-C laptop, tablet or phone from an existing 15-20V DC source such as a compatible power adapter or portable battery.
Build and Daily Use
The cable carries a male DC jack on one end and a USB-C plug on the other, supporting a wide range of fast-charge protocols including QC2.0, QC3.0, FCP, AFC, SCP and USB PD. Maximum output profiles are 5V/2A, 9V/3A and 20V/3.25A, so the connected device negotiates the appropriate level automatically.
Pre-Purchase Checks
Confirm that your DC source delivers between 15V and 20V and can supply sufficient current for the desired output profile. Verify that the target device accepts USB-C PD input and that its required voltage and current fall within the cable’s 65W maximum rating to avoid damage.
Highlights
- Delivers up to 65W from a 4.0x1.3mm DC jack
- Accepts 15-20V input for broad laptop compatibility
- USB-C output supports PD and multiple fast-charge protocols
- Powers Macs, laptops, tablets and phones at 65W
- Verify device voltage and current before use to prevent damage
Specifications
| Brand | Fervit |
|---|
Questions about this item
What USB-C Power Delivery voltage profiles does this 65 W cable support?
The cable negotiates 5 V at 2 A, 9 V at 3 A and 20 V at 3.25 A, reaching a 65 W maximum.
What DC barrel size plugs into the input end of the cable?
A 4.0 mm outer diameter by 1.3 mm inner diameter barrel connector fits the input jack.
Which step must be checked before connecting the cable to avoid damaging a device?
Verify that the source supplies 15–20 V DC and matches the device’s required voltage and current before plugging in.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



