We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 6-pin ATX power adapters with 90-degree angled connectors, one pointing up and one pointing down

Fervit

Fervit ATX 6-Pin Male to Female 90° Angled Power Adapter 2-Pack

SKU CH-K7SE-14XC9

Two 90° angled ATX 6-pin adapters reroute GPU power cables for tight chassis clearance

  • 90° angled connectors fit tight GPU clearance spaces
  • Two adapters included: one up-angled, one down-angled
  • Redirects 6-pin power cables from vertical to horizontal routing
  • Solves limited-height chassis GPU installation challenges
  • Not compatible with CPU EPS power connectors

Cable routing for tight GPU clearance

This pair of ATX 6-pin adapters re-routes power cables from vertical to horizontal, clearing the height restriction found in compact chassis. One unit angles upward and the other downward so builders can choose the orientation that fits their card layout. They are intended solely for graphics-card power headers and do not work with CPU EPS connectors. The two-piece pack covers both directions in a single purchase.

Practical limits of the ATX 6-pin interface

The adapters only change the cable exit angle; they do not alter the electrical specification or current rating of the standard 6-pin connector. Because they add a short rigid bend, total insertion depth increases slightly, which can matter when the header sits very close to a side panel. They cannot be used on 8-pin EPS sockets or any non-ATX power header. No signal conversion or voltage regulation is provided.

Build quality and daily handling

Each adapter moulds the 90-degree turn into a single housing, avoiding loose joints that could wiggle free during transport. The male pins and female sockets are keyed to the standard ATX pattern, so they engage with the same force as a direct cable connection. With both up and down angles supplied, the installer can keep cable runs flat against the PCB or route them along the case floor without sharp kinks.

Highlights

  • 90° angled connectors fit tight GPU clearance spaces
  • Two adapters included: one up-angled, one down-angled
  • Redirects 6-pin power cables from vertical to horizontal routing
  • Solves limited-height chassis GPU installation challenges
  • Not compatible with CPU EPS power connectors

Specifications

BrandFervit

Questions about this item

Should I pick the up-angled or down-angled adapter for my graphics card?

The pack includes one up-angled (Type-B) and one down-angled (Type-A) adapter so you can route the 6-pin cable either upward or downward depending on clearance above the GPU.

Will this adapter affect the power delivery to my graphics card?

It simply reorients the existing 6-pin connection from vertical to horizontal without altering the electrical path, so the GPU receives the same power as a straight header.

Does the 90-degree angle work with the standard ATX 6-pin connector on my power supply?

Yes, the male end plugs into the PSU's 6-pin socket and the female end accepts the GPU cable, both following the standard ATX pinout.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.