Fervit
Fervit Angled SATA 22 Pin to USB 3.0 Adapter Cable
Connects 2.5" and 3.5" SATA drives via USB 3.0 at up to 5Gb/sec with hot-swap support
- Connect 2.5 and 3.5 inch drives via USB 3.0
- Reach up to 5 Gb/s transfer speed with SuperSpeed USB 3.0
- Swap drives without reboot using hot-swap and plug-and-play support
- Power 2.5 inch laptop drives directly from the USB port
- Run 3.5 inch desktop drives with optional DC 12 V 2 A adapter
Angled SATA 22 Pin to USB 3.0 Adapter
This angled adapter connects a SATA hard drive or SSD to a USB 3.0 port on a desktop or laptop. It accepts both 2.5 inch and 3.5 inch mass storage class drives. The right-angle connector reduces strain on the drive port in tight spaces. It is suited for users who need quick, temporary access to bare drives without installing them internally.
Build Quality and Daily Connector Use
The 22 pin SATA interface plugs directly into the drive while the USB 3.0 end connects to the host. A 5.5 by 2.1 mm DC12V 2A power supply is required for 3.5 inch desktop drives and is not included. No external power is needed for 2.5 inch laptop drives. The cable supports hot swapping and plug and play operation for convenient drive changes.
Upgrade Path and When It Makes Sense
This adapter replaces internal drive bays or dock stations when you only need occasional access to SATA drives. It upgrades from USB 2.0 adapters by offering up to 5Gb/sec transfer speeds under the USB 3.0 specification. The jump is worth it when moving large backups or disk images where the faster interface saves measurable time. It does not serve drives that require a different interface or form factor.
Highlights
- Connect 2.5 and 3.5 inch drives via USB 3.0
- Reach up to 5 Gb/s transfer speed with SuperSpeed USB 3.0
- Swap drives without reboot using hot-swap and plug-and-play support
- Power 2.5 inch laptop drives directly from the USB port
- Run 3.5 inch desktop drives with optional DC 12 V 2 A adapter
Specifications
| Brand | Fervit |
|---|
Questions about this item
What does the USB 3.0 interface cap the transfer rate at?
The Super-Speed USB 3.0 interface supports up to 5Gb/sec maximum transfer rate.
What physical power connector does the 3.5 inch drive need?
A 3.5 inch desktop disk requires an external DC12V 2A power adapter with a 5.5X2.1mm plug, which is not included.
How is the adapter installed and what step is often missed?
Connect the 22 pin SATA connector to the drive, plug the USB 3.0 end into the computer, and for 3.5 inch drives attach the required 12V power before switching on.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



