Fervit
Fervit 9pin 10pin USB 2.0 Motherboard Header to Micro USB 5Pin Cable 50cm
Converts a 9pin or 10pin motherboard USB 2.0 header to a Micro USB 5Pin port for charging or data at 480 Mbps over a 50cm cable
- Converts a 9pin or 10pin USB 2.0 header to Micro USB 5Pin for internal devices
- 50 cm length fits tight chassis spaces without excess cable clutter
- Plug-and-play design needs no drivers or configuration for immediate use
- USB 2.0 specification delivers up to 480 Mbps data transfer for sensors and cameras
- Powers and charges Micro USB peripherals such as mini monitors, LED bars and small fans
Header-to-Micro-USB Adapter Cable
This Fervit cable converts a 9-pin or 10-pin internal USB 2.0 motherboard header to a Micro USB 5-pin connector. It is intended for builders who need to power or link small devices such as mini monitors, sensor panels or cameras inside a chassis. The 50 cm length keeps routing tidy in compact builds.
Check Header Layout Before Buying
Verify that your motherboard exposes a standard 9-pin or 10-pin USB 2.0 header with the correct pin assignment. Ensure the Micro USB end matches the device port you plan to connect. The cable carries only USB 2.0 signals, so confirm the target device does not require a faster interface.
Replaces Improvised Header Wiring
This ready-made assembly replaces hand-soldered or jury-rigged header cables that are prone to loose pins and signal loss. The jump is worth it when you want a reliable 480 Mbps link without custom crimping, especially in tight-fit applications where space is limited.
Highlights
- Converts a 9pin or 10pin USB 2.0 header to Micro USB 5Pin for internal devices
- 50 cm length fits tight chassis spaces without excess cable clutter
- Plug-and-play design needs no drivers or configuration for immediate use
- USB 2.0 specification delivers up to 480 Mbps data transfer for sensors and cameras
- Powers and charges Micro USB peripherals such as mini monitors, LED bars and small fans
Specifications
| Brand | Fervit |
|---|
Questions about this item
Does the 50 cm cable include both the 9-pin and 10-pin motherboard headers, or do I need to buy an adapter separately?
The cable has a single 10-pin connector that fits a standard 9-pin USB 2.0 motherboard header; no extra adapter is required.
Should I choose a different length or header style for a Mini Monitor sensor panel?
This model is only offered in 50 cm with a 10-pin to Micro USB 5-pin layout, which matches the panel's Micro USB port.
Will the 480 Mbps rating deliver full USB 2.0 speed when the cable is routed inside a case?
Yes, the 2.0 specification supports 480 Mbps, and the 50 cm length keeps signal loss well within the standard's limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



