Fervit
Fervit 8K DisplayPort 1.4 cable 16.4ft 8K 60Hz 4K 144Hz 2K 240Hz
A 16.4 ft DisplayPort 1.4 cable supporting 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with quadruple shielding, a magnetic filter and locking connectors
- 8K at 60 Hz for ultra-sharp visuals
- 4K at 144 Hz for smooth high-refresh gaming
- 2K at 240 Hz for competitive frame rates
- Quadruple shielding with magnetic ring blocks EMI and EMC interference
- Latching connectors keep the link secure during use
8K 60Hz DisplayPort 1.4 cable
The Fervit DisplayPort 1.4 cable carries 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz over a 16.4 ft run. It connects a DisplayPort source to a DisplayPort monitor or projector for extended or mirrored desktops. Audio and video travel together without extra drivers. The bidirectional design works either way round.
Replacing shorter or unshielded leads
Swap out a shorter cable when the display sits farther from the PC, or upgrade from a basic lead that flickers at high refresh rates. The quadruple shielding and magnetic ferrite ring suppress EMI and EMC interference, keeping the picture stable at the supported resolutions. The jump is worth it when cable length or signal noise degrades the image.
Fitting the link into a workstation
The latch-equipped connectors lock into standard DisplayPort ports on graphics cards and monitors, preventing accidental disconnects during desk moves. No external power or software is needed, so the cable adds no load to the system. It frees up desk layout options by spanning longer distances without signal loss.
Highlights
- 8K at 60 Hz for ultra-sharp visuals
- 4K at 144 Hz for smooth high-refresh gaming
- 2K at 240 Hz for competitive frame rates
- Quadruple shielding with magnetic ring blocks EMI and EMC interference
- Latching connectors keep the link secure during use
Specifications
| Brand | Fervit |
|---|
Questions about this item
What connector type and length does the Fervit 8K DisplayPort 1.4 cable use?
The cable has full-size DisplayPort connectors on both ends and measures 16.4ft in length.
Which step must be followed when unplugging the latched DisplayPort connectors?
Press the release button on the connector before pulling to avoid damaging the latch mechanism.
What shielding and interference protection does the cable provide for long-term signal stability?
Quadruple shielding plus a filtering magnetic ring deliver EMI/EMC protection to prevent signal attenuation and external interference.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



