We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four short cables with Type-C, Micro-USB, DC 5.5x2.1mm and 3.5x1.35mm connectors

Fervit

Fervit 4pcs USB Cable Kit 10cm Type-C Micro-USB DC 5.5x2.1mm 3.5x1.35mm

SKU CH-TBN4-MKR6B

Four short cables with Type‑C, Micro‑USB, DC 5.5×2.1 mm and DC 3.5×1.35 mm connectors for DIY backpack power projects

  • Delivers up to 5V 3A power through USB 2.0
  • Includes Type-C, Micro-USB, 5.5×2.1 mm and 3.5×1.35 mm connectors
  • 10 cm length designed for internal backpack routing
  • Female backpack mount extends existing power cables
  • Four cables supplied for DIY soldering projects

Kit Contents

The Fervit kit supplies four short cables terminated with Type‑C, Micro‑USB, DC 5.5 x 2.1 mm and DC 3.5 x 1.35 mm connectors for powering heated pads, LED lights or mobile gear from a backpack‑mounted power bank.

Upgrade Path

It replaces loose, single‑connector leads that limit you to one device type; the jump is worth it when you need a single 10 cm harness that carries up to DC 5V 3A over USB 2.0 for multiple barrel‑plug and USB peripherals.

Installation Notes

Each cable requires soldering to the backpack’s female mount, so basic iron work and heat‑shrink are needed; the main pitfall is cold joints or reversed polarity on the barrel connectors, which will prevent the attached device from receiving power.

Highlights

  • Delivers up to 5V 3A power through USB 2.0
  • Includes Type-C, Micro-USB, 5.5×2.1 mm and 3.5×1.35 mm connectors
  • 10 cm length designed for internal backpack routing
  • Female backpack mount extends existing power cables
  • Four cables supplied for DIY soldering projects

Specifications

BrandFervit

Questions about this item

What mounting method does the 10cm cable kit use for backpack installation?

The cables are designed for internal backpack mounting with female connectors that accept male power cables, creating a pass-through charging point for power banks and heated gear.

What soldering work is required to install the four different connector cables?

Each 10cm cable arrives with exposed wires that must be soldered to your device or power source; the kit includes Type-C, Micro-USB, DC 5.5x2.1mm and DC 3.5x1.35mm ends for DIY assembly.

Which connector in the kit will need replacement first under repeated plug cycles?

The Micro-USB connector typically wears faster than the Type-C or DC barrel plugs due to its smaller contact area and single-sided insertion design.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.