We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver front panel with four USB ports for a 5.25 inch bay

Fervit

Fervit 4-Port 10Gbps USB 3.1 Gen 2 Type-C to Type-A Internal Hub Adapter for 5.25" Bay

SKU CH-HDX9-G9K4V

Adds four 10Gbps USB 3.1 Gen 2 Type-A ports to a 5.25" bay, powered by SATA and connected via a motherboard Type-E header

  • Full 10Gbps bandwidth via VL822 chipset with Multiple INs technology
  • Stable 5V/2A power from SATA connector for high-demand devices
  • Converts empty 5.25" bay into front-panel USB hub for quick access
  • Connects to motherboard 20-pin Type-E (Key-A) header via internal cable
  • Driver-free operation on Windows 11/10/8/7/XP expands desktop ports instantly

Front-panel USB 3.1 Gen 2 hub for 5.25" bays

This adapter adds four front-access Type-A ports to a desktop by mounting in a standard 5.25-inch optical drive bay. It connects to the motherboard through a 20-pin Type-E header and draws supplementary power from a SATA connector. The VL822 chipset manages traffic across all ports. It suits builders who want quick-access USB ports without occupying rear I/O space.

10Gbps shared bandwidth with SATA power backup

The hub delivers up to 10Gbps aggregate throughput over USB 3.1 Gen 2 and remains backward compatible with 3.0, 2.0 and 1.1 devices. The dedicated SATA power input supplies a stable 5V/2A output so external hard drives and other high-draw peripherals run reliably. Bandwidth is shared across the four ports, so simultaneous heavy transfers will contend for the single 10Gbps upstream link.

Steel bay chassis with internal Type-E cable

The unit fits a standard 5.25-inch bay and uses a steel frame that aligns with case mounting holes for a secure installation. A 20-pin Type-E (Key-A) cable routes to the motherboard header, while the SATA power plug connects to a spare PSU lead. No drivers are required for Windows 11, 10, 8, 7 or XP, so the hub is operational immediately after the cables are seated.

Highlights

  • Full 10Gbps bandwidth via VL822 chipset with Multiple INs technology
  • Stable 5V/2A power from SATA connector for high-demand devices
  • Converts empty 5.25" bay into front-panel USB hub for quick access
  • Connects to motherboard 20-pin Type-E (Key-A) header via internal cable
  • Driver-free operation on Windows 11/10/8/7/XP expands desktop ports instantly

Specifications

BrandFervit

Questions about this item

Will my older USB 2.0 devices still work at their normal speed on the VL822 chipset hub?

The hub is backward compatible with USB 2.0 and 1.1, so legacy peripherals operate at their rated speeds without extra configuration.

How can I confirm the front-panel ports are delivering the full 10Gbps link after installation?

Connect a USB 3.1 Gen 2 device and check the connection speed in Device Manager or run a benchmark; a 10Gbps link will be reported for that port.

Does the package include the internal Type-E cable and SATA power lead, or must I buy them separately?

The adapter ships with the 20-pin Type-E internal cable and a SATA power connector, so no additional cables are required for installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.