Fervit
Fervit 4.8x1.7mm DC Jack to USB-C PD Cable 65W 15V 20V
Converts a 4.8x1.7mm DC jack to USB-C PD delivering up to 65W at 20V 3.25A
- Charges laptops up to 65 W with 20 V 3.25 A output
- Powers phones and tablets at 9 V 3 A via USB-C PD
- Accepts 15 V to 20 V DC input from 4.8 × 1.7 mm barrel jack
- Compatible with QC 2.0, QC 3.0, FCP, AFC, SCP and other fast-charge protocols
- Verify device voltage and current before use to prevent damage
4.8x1.7mm DC Jack to USB-C PD Cable
This cable converts a 4.8x1.7mm DC barrel input into a USB-C power plug supporting Power Delivery at 9V, 15V and 20V up to 65W. It is intended for users who need to power USB-C laptops, tablets or phones from an existing DC power source rated between 15V and 20V.
Barrel connector and USB-C plug
The 4.8mm outer by 1.7mm inner barrel jack fits compatible DC adapters, while the USB-C plug delivers negotiated voltages of 5V at 2A, 9V at 3A and 20V at 3.25A. Supported protocols include QC2.0, QC3.0, DCP, PE+1.1, PE2.0, FCP, AFC, SFCP, SCP and USB PD, enabling broad device compatibility when the source voltage matches the required input range.
65W maximum output with multi-protocol negotiation
The cable handles up to 65W output once the connected charger and device agree on a supported voltage and current level. Correct voltage verification is essential because mismatched input can damage the attached hardware. Thermal behaviour and acoustic noise depend on the external power supply and the powered device rather than on the cable itself.
Highlights
- Charges laptops up to 65 W with 20 V 3.25 A output
- Powers phones and tablets at 9 V 3 A via USB-C PD
- Accepts 15 V to 20 V DC input from 4.8 × 1.7 mm barrel jack
- Compatible with QC 2.0, QC 3.0, FCP, AFC, SCP and other fast-charge protocols
- Verify device voltage and current before use to prevent damage
Specifications
| Brand | Fervit |
|---|
Questions about this item
What input voltage range does the 4.8x1.7mm DC jack require for the cable to negotiate 65 W output?
The cable accepts 15 V to 20 V DC on the 4.8x1.7 mm barrel connector and will request up to 65 W over USB-C PD.
What outer and inner diameters must my power supply's barrel plug have to fit the 4.8x1.7 mm jack on this cable?
The jack is sized for a 4.8 mm outer diameter and a 1.7 mm centre pin; the supply's plug must match those dimensions exactly.
Which step do people often miss when connecting this cable to a laptop?
Confirm the laptop charges at 15 V or 20 V via USB-C PD before plugging in; the cable will not step voltage up or down.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



