We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 30cm cable with a 19/20pin header plug and two USB 3.0 ports on a 90 degree bracket with screw holes

Fervit

Fervit 19/20Pin Motherboard Header to USB 3.0 Dual Port Female Screw Mount 90° Down Angled Cable 30cm

SKU CH-1ANC-NP8EP

Converts a motherboard 19/20-pin header into two screw-mount USB 3.0 ports with a 90-degree down angle and 30 cm length for tight spaces

  • Converts a 19/20-pin header into two USB 3.0 ports
  • 90° down-angled plug fits tight chassis clearances
  • Screw-mount holes secure each USB 3.0 socket firmly
  • 30 cm cable keeps front-panel routing tidy
  • 5 Gbps bandwidth enables two-way super-speed transfers

Front-panel USB 3.0 expansion

This Fervit adapter converts a single 19/20-pin motherboard header into two screw-mount USB 3.0 Type-A ports. It targets builders adding front-panel connectivity to cases that lack native USB 3.0 cut-outs or need extra ports for external drives and peripherals. The 30 cm cable reaches most front-panel layouts without excess slack.

Sustained 5 Gbps throughput

Rated at 5 Gbps, the link supports simultaneous two-way data transfer rather than burst-only speeds. Real-world throughput stays consistent during large file copies or backups because the header-to-port path adds no protocol conversion overhead. Builders relying on continuous reads from external SSDs will not encounter thermal throttling from the cable itself.

Screw-mount security and angled clearance

Two mounting holes on the female end let you bolt the ports to a chassis bracket or custom panel, preventing port wiggle during frequent insertions. The 90-degree down-angled connector seats flush against the motherboard header, clearing tall capacitors or shrouds that would block a straight plug. This orientation also reduces strain on the header pins when the front panel is removed for maintenance.

Highlights

  • Converts a 19/20-pin header into two USB 3.0 ports
  • 90° down-angled plug fits tight chassis clearances
  • Screw-mount holes secure each USB 3.0 socket firmly
  • 30 cm cable keeps front-panel routing tidy
  • 5 Gbps bandwidth enables two-way super-speed transfers

Specifications

BrandFervit

Questions about this item

Does the 30 cm cable run warm or draw noticeable power when both USB 3.0 ports are used all day?

The passive 30 cm cable adds no active components, so it generates no extra heat and draws only the negligible current the motherboard header already supplies.

What must my motherboard provide for the 19/20-pin plug to work?

A standard internal USB 3.0 19/20-pin header is required; the cable plugs directly into that socket.

Will USB 2.0 devices still function at their rated speed when plugged into the dual USB 3.0 female ports?

Yes, USB 2.0 devices operate normally through the USB 3.0 ports, which are backward compatible with the older standard.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.