We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fervit 12VHPWR male-to-female 360-degree up-angled power adapter, black plastic body

Fervit

Fervit 12VHPWR ATX 3.0 PCI-E 5.0 Power Adapter Male to Female Up Angled 360 Degree

SKU CH-E4G1-S0JMP

An angled 12VHPWR adapter that routes power to 16-pin graphics cards in tight spaces while supporting 600 W delivery under ATX 3.0 and PCI-E 5.0

  • Fits tight GPU clearances with a 360-degree up-angled male-to-female design
  • Delivers up to 600W through the PCI-SIG 12VHPWR H+ 12+4 pin connector
  • Ready for ATX 3.0 and PCIe 5.0 graphics cards including RTX 4080 and 5090
  • Supports the new 12VHPWR standard debuting with RTX-40 and AMD RDNA 3 cards
  • Angled modular adapter connects securely even when space around the port is limited

12VHPWR angled adapter for modern GPUs

This Fervit adapter converts a male 12VHPWR plug to a female socket with a 360-degree up-angled profile. It follows the ATX 3.0 and PCI-E 5.0 specifications for the new 12+4-pin connector. The design targets builders installing RTX 40-series or AMD RDNA 3 graphics cards in tight spaces.

Fits cramped GPU power zones; not a power upgrade

The swivel head lets the cable run parallel to the card, clearing low-profile cases or bulky coolers where a straight header would foul. It passes through the same 600 W rating as the native connector, so it suits any 12VHPWR-equipped GPU. Builders who already have ample clearance around a straight socket gain no benefit from the angle.

360-degree swivel head clears tight rear brackets

The single specification that decides fit is the rotating up-angled housing. If the chassis window, backplate or adjacent slot leaves less room than a straight 12VHPWR plug requires, this adapter restores compatibility without changing cable routing.

Highlights

  • Fits tight GPU clearances with a 360-degree up-angled male-to-female design
  • Delivers up to 600W through the PCI-SIG 12VHPWR H+ 12+4 pin connector
  • Ready for ATX 3.0 and PCIe 5.0 graphics cards including RTX 4080 and 5090
  • Supports the new 12VHPWR standard debuting with RTX-40 and AMD RDNA 3 cards
  • Angled modular adapter connects securely even when space around the port is limited

Specifications

BrandFervit

Questions about this item

Does the 12VHPWR adapter add heat or resistance when delivering 600W continuously?

The adapter is a passive connector rated for 600W; it introduces no active cooling or measurable heat beyond normal cable resistance.

What power-supply cable must I already have to plug this male 12VHPWR adapter into my PSU?

You need a native 12VHPWR (12+4 pin) cable from an ATX 3.0 power supply; the adapter converts that male end to an angled female port.

Will the 360-degree angled female port clear the tight clearance on my RTX 4080 without stressing the 16-pin socket?

Yes, the 360-degree up-angled design routes the cable upward in tight chassis spaces, reducing bend radius on the graphics card's 12VHPWR socket.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.