We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12VHPWR modular adapter with 360 degree down angled male to female 16 pin connector

Fervit

Fervit 12VHPWR ATX 3.0 PCI-E 5.0 Modular Adapter Male to Female 360° Down Angled

SKU CH-2Z9M-17W74

A 12VHPWR modular adapter with a 360-degree down-angled male-to-female design delivers up to 600W for ATX 3.0 and PCI-E 5.0 graphics cards

  • Delivers up to 600 W via PCI-SIG 12VHPWR H+ connector
  • 360 ° down-angled design fits tight clearance around graphics-card ports
  • ATX 3.0 and PCIe 5.0 ready for modern high-power GPUs
  • Male-to-female modular adapter adds 12+4-pin connection without replacing cables
  • Compatible with 4080 and 5090 class 16-pin graphics cards

12VHPWR ATX 3.0 Adapter

This Fervit modular adapter converts a male 12VHPWR connector to a female port with a 360° down-angled design. It supports the ATX 3.0 and PCI-E 5.0 specifications for graphics cards such as the 4080 and 5090 models. The unit handles up to 600W through its 12 power pins and 4 signal pins. Builders working in tight chassis clearance will find the angled geometry useful.

360° Angled Connector Geometry

The adapter reorients the cable exit by 360 degrees, letting the 16-pin 12+4P plug seat fully even when surrounding components restrict straight access. This reduces strain on the graphics card socket and keeps the power cable from pressing against side panels or bulky coolers. No additional software or drivers are involved; the change is purely mechanical. The PCI-SIG H+ compliance ensures the pinout matches the 600W delivery standard.

Tool-Free Installation Risk

Installation requires only aligning the male end with the PSU cable and the female end with the graphics card, then pressing both until the latches click. The most common issue is incomplete seating on either side, which can cause intermittent contact or overheating at the pins. Verifying that both connectors are fully latched before powering on prevents this. The adapter adds no length to the cable run, so existing cable management remains unchanged.

Highlights

  • Delivers up to 600 W via PCI-SIG 12VHPWR H+ connector
  • 360 ° down-angled design fits tight clearance around graphics-card ports
  • ATX 3.0 and PCIe 5.0 ready for modern high-power GPUs
  • Male-to-female modular adapter adds 12+4-pin connection without replacing cables
  • Compatible with 4080 and 5090 class 16-pin graphics cards

Specifications

BrandFervit

Questions about this item

Will the 12+4 pin connector on this adapter need periodic replacement?

The PCI-SIG 12VHPWR H+ connector is rated for 600 W delivery and designed for the life of the graphics card; no scheduled replacement is required if it stays fully seated.

What thermal limit appears first when the adapter runs at 600 W continuously?

The connector specification targets 600 W without exceeding its temperature rating, so the cable or PSU thermal limits will be reached before the adapter itself.

How much extra heat or noise does the 360° angled adapter add during all-day use?

The adapter is a passive metal connector with no moving parts, so it adds no audible noise and negligible heat beyond normal resistive loss at 600 W.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.