We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue USB 3.0 cable with standard A and Micro B connectors, Micro end has two mounting screws

Fervit

Fervit 120cm USB 3.0 A Male to Micro USB 3.0 B Male with Mount Panel Screws

SKU CH-YN2G-4NACR

120 cm USB 3.0 A male to Micro USB 3.0 B male cable with M2 panel-mount screws for a secured connection, up to 4.8 Gbps throughput and backwards compatible with USB 2.0 and 1.1

  • Secured connection with M2 mount panel screws on Micro B end
  • USB 3.0 throughput up to 4.8 Gbps with compatible host and device
  • Backwards compatible with USB 2.0 and 1.1 standards
  • 120 cm cable length for flexible device placement
  • Thumbscrew locking design prevents accidental disconnection during use

Secured USB 3.0 cable for external drives

This 120cm cable connects a USB 3.0 Type-A host to a Micro USB 3.0 Type-B device such as a portable hard disk. Thumbscrew locking screws on the Micro B end provide a secured connection that resists accidental disconnection. The cable supports up to 4.8Gbps throughput with compatible hosts and devices. It is backward compatible with USB 2.0 and 1.1 equipment.

Check port type and panel clearance before ordering

Verify that your device uses a Micro USB 3.0 Type-B port, which is wider than the older Micro USB 2.0 connector. Ensure the mounting panel has threaded holes for the two M2 screws supplied on the cable end. Confirm your host controller and device both support USB 3.0 to achieve the 4.8Gbps rate; otherwise the link will fall back to 480Mbps. The 120cm length suits typical desktop or bench setups.

Passive cable runs cool

The cable draws no external power and adds no active cooling requirement to your system. Signal integrity is maintained by the locking screws, which keep the contact stable during normal use. No fan noise or thermal load is introduced by the cable itself. Power delivery follows the USB 3.0 specification for the connected device.

Highlights

  • Secured connection with M2 mount panel screws on Micro B end
  • USB 3.0 throughput up to 4.8 Gbps with compatible host and device
  • Backwards compatible with USB 2.0 and 1.1 standards
  • 120 cm cable length for flexible device placement
  • Thumbscrew locking design prevents accidental disconnection during use

Specifications

BrandFervit

Questions about this item

Does the cable include the mounting hardware or must I buy M2 screws separately?

The Micro B connector has two M2 mount panel screws built in, so no separate screws are required.

Should I choose this 120cm length or a different one for a desktop external drive?

At 120cm the cable reaches most desktop ports without excess slack; pick a shorter or longer version only if your port distance differs.

Will I actually see 4.8Gbps transfer speed when I plug this into my USB 3.0 hard disk?

The cable supports up to 4.8Gbps with a USB 3.0 host and device; real-world speed depends on the drive and system overhead.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.