We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with a 10 pin header and a push button

Fervit

Fervit 10Pin Motherboard Power Switch Tester Board with Button

SKU CH-FV20-BYRJQ

A 10-pin motherboard tester board with integrated power and reset buttons plus an HDD LED for bench testing without a chassis

  • Tests power and reset switches without a case
  • 10-pin standard layout fits desktop motherboards
  • Built-in HDD activity LED shows drive status
  • Supports Windows XP through Windows 11
  • Simplifies bench testing and maintenance tasks

What this board does and who uses it

The Fervit 10Pin tester board connects to a standard 2x5 motherboard header, leaving pin 10 empty, and provides onboard power, reset and HDD LED buttons. It lets system builders and repair technicians power cycle a desktop PC repeatedly without a case, supporting Windows XP through Windows 11. This tool is not for users who need a permanent front-panel replacement or who want voltage monitoring features.

Thermals, noise and power in normal use

The adapter draws negligible power directly from the motherboard header and has no active cooling, so it adds no audible noise or measurable heat to the system. It is designed for brief, repeated switching cycles during bench testing rather than continuous load, and its passive construction means thermal output remains imperceptible. No fan, pump or external power supply is involved.

What the bundled button and LED change

The integrated power and reset buttons eliminate the need to short header pins manually with a screwdriver, reducing the risk of accidental shorts during frequent reboots. The onboard HDD activity LED gives immediate visual confirmation that the storage subsystem is responding, which speeds up POST verification and drive diagnostics on the bench.

Highlights

  • Tests power and reset switches without a case
  • 10-pin standard layout fits desktop motherboards
  • Built-in HDD activity LED shows drive status
  • Supports Windows XP through Windows 11
  • Simplifies bench testing and maintenance tasks

Specifications

BrandFervit

Questions about this item

How do I connect the 2x5pin header to my motherboard without reversing the power and reset pins?

Align the empty Pin10 position with the missing pin on the motherboard header, then press the board straight down so the power and reset buttons match the board labels.

What part of the tester board will wear out first with repeated pressing?

The tactile switches for power and reset are the only moving parts and will degrade after many thousands of cycles.

How long can I leave the board powered on during a bench test before the HDD LED overheats?

The HDD LED draws only indicator current and does not overheat, so the board can remain powered for the full test session.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.