We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 1.2 m right-angled Micro USB 3.0 cable with screw mount connector

Fervit

Fervit 1.2m 90° Right-Angled Micro USB Screw Mount 3.0 Cable

SKU CH-JJNC-00G46

A 1.2 m right-angled Micro USB 3.0 cable with screw mount for secure industrial camera tethering

  • 90° right-angled connector routes cable downward for comfortable tethered shooting
  • Screw-mount Micro-USB plug secures connection on industrial cameras
  • USB 3.0 interface supports fast data transfer for high-resolution workflows
  • 2 m length gives flexible positioning without excess slack
  • Left-angled exit matches specific camera port orientation for clean cable management

Industrial Camera Tethering

This 1.2 m USB 3.0 cable connects industrial cameras and tethered photography rigs such as the Nikon D800. A 90 degree right-angled Micro-USB plug with screw-lock mounts secures the link against accidental pulls. The left-angled exit routes the cable toward the ground for a natural shooting feel.

Secure Lock and Cable Routing

The screw-mount collar prevents vibration from unseating the connector during long capture sessions. Right-angle geometry keeps the cable close to the body, reducing snag risk on tripods or rigs. USB 3.0 signalling delivers full-speed data transfer without extra power draw.

Left-Angle Exit Orientation

The Micro-USB plug angles left, so the cable drops downward from the port. Buyers must verify that their device port orientation matches this exit direction before purchase. Right-angled or upward-facing ports will route the cable awkwardly.

Highlights

  • 90° right-angled connector routes cable downward for comfortable tethered shooting
  • Screw-mount Micro-USB plug secures connection on industrial cameras
  • USB 3.0 interface supports fast data transfer for high-resolution workflows
  • 2 m length gives flexible positioning without excess slack
  • Left-angled exit matches specific camera port orientation for clean cable management

Specifications

BrandFervit

Questions about this item

How do I install the 90° right-angled Micro USB screw-mount connector on my industrial camera?

Align the left-angled Micro USB plug with the camera port so the cable exits toward the ground, then tighten the two retention screws by hand until snug — do not use tools, or you may strip the threads.

What maintenance will the screw-mount Micro USB 3.0 cable need over time?

Inspect the screw threads and connector housing monthly for dust or corrosion; clean contacts with a dry anti-static brush and re-tighten the screws if vibration has loosened them.

What is the first limit I will hit when using this 1.2 m USB 3.0 cable for sustained tethered shooting?

The 1.2 metre length is the practical limit — signal integrity for USB 3.0 drops off beyond this distance, so you cannot extend the run without an active repeater.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.