We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray resin-fiberglass repair wrap on a card, two inches wide by forty-eight inches long

Fernco Inc.

Fernco Inc. FPW248CS 2 in x 48 in repair wrap trap

SKU CH-CY7F-E0Q6E MPN FPW248CS

Resin-fiberglass wrap repairs 1/8 in to 1 in pipes in 30 minutes, withstanding 425 °F and 26,600 psi compression

  • TypeDrain Components
  • ColorGray
  • Selling UnitCard
  • Repairs pipes up to 1 in diameter with 2 in x 48 in wrap
  • Cures fully in 30 min for quick return to service
  • EPA approved resin fiberglass works on concrete copper plastic PVC rubber galvanized
  • Withstands 425 °F operating temperature for hot water lines
  • Delivers 26 600 psi compression and 16 100 psi flexural strength

Pipe Repair Wrap Kit

The Fernco FPW248CS is a resin-fiberglass wrap designed to seal leaks on pipes from 1/8 in to 1 in diameter. It suits plumbers and maintenance teams needing a fast, permanent fix on copper, PVC, galvanised, concrete or rubber lines without replacing sections. The gray wrap activates with water and conforms to irregular surfaces for a tight bond.

Thermals Noise And Power

This repair wrap requires no electricity, moving parts or external heat source, so it produces zero noise and draws no power during application or service. The resin system reaches full cure in 30 minutes at ambient temperature and afterwards withstands continuous operating temperatures up to 425 degrees F without degradation. No thermal management or ventilation is needed.

Compression Strength 26 600 Psi

The cured laminate delivers a compression strength of 26 600 psi and a flexural strength of 16 100 psi, the key figures that determine whether the patch will hold pressure on the intended line. The 2 in by 48 in roll provides enough material for multiple wraps on the maximum 1 in pipe. It carries EPA approval for potable water contact. Not for pipes larger than 1 in or for structural loads beyond the rated strengths.

Highlights

  • Repairs pipes up to 1 in diameter with 2 in x 48 in wrap
  • Cures fully in 30 min for quick return to service
  • EPA approved resin fiberglass works on concrete copper plastic PVC rubber galvanized
  • Withstands 425 °F operating temperature for hot water lines
  • Delivers 26 600 psi compression and 16 100 psi flexural strength

Specifications

TypeDrain Components
ColorGray
BrandFernco
ModelFPW248CS
Selling UnitCard
Shipping weight0.10 kg
Package size146 × 86 × 38 mm

Questions about this item

How do I install the FPW248CS repair wrap on a leaking pipe?

Clean the pipe surface, activate the resin in water, wrap tightly around the pipe, and maintain pressure for the full 30 min cure — skipping the overlap or releasing early weakens the bond.

What maintenance or replacement will the FPW248CS repair wrap need after installation?

Once fully cured, the resin fiberglass wrap forms a permanent repair rated to 26,600 psi compression and 16,100 psi flexural strength — no scheduled maintenance or replacement is required.

What is the first limit the FPW248CS repair wrap hits under sustained high-temperature use?

The maximum operating temperature is 425 Degrees F; exceeding this limit degrades the resin fiberglass material before the pressure ratings of 26,600 psi compression or 16,100 psi flexural are reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.