We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flexible PVC coupling with stainless steel bands, 6 inch by 2 inch pipe fitting

Fernco Inc.

Fernco Inc. 1056-62 Flexible Coupling Trap 6 in x 2 in

SKU CH-B4NZ-VH6WN MPN 1056-62

Flexible elastomeric PVC coupling joins 6 in pipe to 2 in pipe, rated to 4.3 psi and 140 °F with 300 stainless steel bands

  • TypeDrain Components
  • MaterialElastomeric Polyvinyl Chloride
  • Flexible 6 in x 2 in connection fits drain pipes
  • Elastomeric PVC resists chemicals, fungus and sewer gases
  • 300 stainless steel bands secure the joint under pressure
  • Withstands up to 140 °F for hot-water discharge
  • Meets ASTM C1173 standard for reliable installations

Drain coupling for 6 in by 2 in pipe

The Fernco 1056-62 flexible coupling joins a six-inch pipe to a two-inch pipe in drainage systems. Its elastomeric polyvinyl chloride body resists chemicals, fungus growth and normal sewer gases. Stainless steel 300 bands secure the connection. The fitting meets ASTM C1173 standard.

Pressure and temperature limits in service

The coupling withstands up to 4.3 psi during normal use. Maximum operating temperature is 140 degrees Fahrenheit. Material resists ultraviolet rays for outdoor installations. No noise or power specifications apply to this passive component.

Fits between dissimilar pipe sizes

Inside diameters measure 6-39/64 inches by 2-25/64 inches with a six-inch fitting length. The flexible body accommodates slight misalignment without rigid adapters. Builders needing a straight same-size joint or a different material transition should select another fitting.

Highlights

  • Flexible 6 in x 2 in connection fits drain pipes
  • Elastomeric PVC resists chemicals, fungus and sewer gases
  • 300 stainless steel bands secure the joint under pressure
  • Withstands up to 140 °F for hot-water discharge
  • Meets ASTM C1173 standard for reliable installations

Specifications

TypeDrain Components
MaterialElastomeric Polyvinyl Chloride
BrandFernco
Model1056-62

Questions about this item

How do I install the 1056-62 coupling and what step do people get wrong?

Slide the elastomeric PVC body over the 6-inch and 2-inch pipe ends, then tighten the 300 stainless steel bands evenly; the step often missed is checking that both pipes are fully seated against the centre stop before final tightening.

What maintenance or replacement will the 1056-62 coupling need later?

Inspect the 300 stainless steel bands and elastomeric PVC body periodically for cracks, corrosion or loss of seal; replace the coupling if the material hardens, splits or no longer holds the 4.3 psi rating.

What limit shows up first on the 1056-62 coupling under sustained use?

The 140-degree Fahrenheit temperature ceiling and 4.3 psi pressure limit are the first constraints; exceeding either can degrade the elastomeric PVC and compromise the seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.