We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red PCIe WiFi 7 card with Intel BE200 chip and heatsink

fenvi

fenvi FV-BE8800 WiFi 7 PCIe Adapter Red

SKU CH-C0M1-SFW38

A PCIe WiFi 7 adapter with Intel BE200 chipset delivering up to 8774 Mbps across 6 GHz, 5 GHz and 2.4 GHz bands plus Bluetooth 5.4

  • TypePCIE Wi-Fi Adapter
  • ColorRed
  • Standards802.11be/ax/ac
  • Wireless Data RatesBE8774
  • WiFi GenerationWIFI 7
  • Security64/128-Bbit WEP, 802.1x, WPA, WPA2,WPA3
  • WiFi 7 tri-band adapter reaches 8774 Mbps peak rate
  • 6 GHz band unlocks up to 5800 Mbps for low-latency gaming
  • Bluetooth 5.4 adds higher speed and lower latency than 5.2
  • PCI Express interface fits standard desktop expansion slots
  • Windows 10 and 11 64-bit driver support included

WiFi 7 tri-band desktop adapter

The fenvi FV-BE8800 adds WiFi 7 and Bluetooth 5.4 to a desktop PC through a PCI Express slot. It uses the Intel BE200 chipset and operates on 2.4 GHz, 5 GHz and 6 GHz bands with a combined data rate of 8774 Mbps. The card supports WPA3 encryption and MU-MIMO for efficient multi-device traffic. A red heatsink covers the board.

Check OS and motherboard header

The adapter requires Windows 10 or 11 64-bit; 6 GHz operation needs Windows 11 or a Windows 10 development build. Bluetooth will not function unless the supplied cable is connected to a nine-pin USB header on the motherboard. The product is not compatible with AMD processors according to the supplier. Disable any onboard Wi-Fi before installing this card.

Fits a PCIe slot and frees USB ports

The card installs in an available PCI Express slot and draws power from the slot itself. An external antenna base attaches to the rear bracket for flexible positioning. By providing integrated WiFi 7 and Bluetooth 5.4, it removes the need for separate USB dongles. A router rated at 5400 Mbps or higher is needed to reach the adapter's maximum throughput.

Highlights

  • WiFi 7 tri-band adapter reaches 8774 Mbps peak rate
  • 6 GHz band unlocks up to 5800 Mbps for low-latency gaming
  • Bluetooth 5.4 adds higher speed and lower latency than 5.2
  • PCI Express interface fits standard desktop expansion slots
  • Windows 10 and 11 64-bit driver support included

Specifications

BrandFenvi
ModelWIFI 7 FV-BE8800
TypePCIE Wi-Fi Adapter
ColorRed
Standards802.11be/ax/ac
Wireless Data RatesBE8774
WiFi GenerationWIFI 7
Security64/128-Bbit WEP, 802.1x, WPA, WPA2,WPA3
InterfacePCI Express
Frequency Band2.4Ghz/5Ghz/6Ghz
LEDsPower, Link/Activity
BluetoothBluetooth 5.4
System RequirementsWindows 10/11 64 bit
FeaturesWIFI 7

Questions about this item

What comes in the box and do I need any extra cables for Bluetooth?

The adapter is a single PCIe card with a red heatsink. To use Bluetooth 5.4 you must connect the supplied Bluetooth power cable to a 9‑pin USB header on the motherboard; without that link Bluetooth will not function.

Which WiFi 7 speed tier should I expect from the FV‑BE8800?

The card is rated BE8774 — up to 5800 Mbps on the 6 GHz band, 2402 Mbps on 5 GHz and 574 Mbps on 2.4 GHz. Those are the three tri‑band maximums for this model.

What does the 8774 Mbps headline figure mean once the card is installed in my PC?

It is the combined theoretical ceiling across all three bands. Real‑world throughput will be lower and depends on a WiFi 7 router that supports 160 MHz channels, a Windows 11 or Windows 10 64‑bit Dev build, and a clean 6 GHz environment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.