We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fender PD200 matte aluminium shock mount with adjustable inner ring and double rubber suspension rings

Fender PD200 Shock Mount for PD200X/PD200XS Microphones

SKU CH-2YX8-APE70

Aluminium shock mount for 56 mm microphones with removable inner ring and double-layer vibration isolation

  • MaterialsAluminum
  • SpecificationAluminum, Matte, 0.15 pounds, 3.5052 L x 10.2108 W x 15.494
  • Dimension14.33in W x 12.83in H x 9.06in D
  • Weight0.15 pounds
  • Removable inner-ring screw secures 56 mm microphones without loosening
  • Double-layer shock-absorbing rings and rubber bands suppress vibration and handling noise
  • Stable aluminium frame keeps recordings clear during streaming, podcasting or voice work
  • 3/8″ to 5/8″ adapter compatibility fits most boom arms and mic stands
  • Lightweight aluminium build at 0.15 lb adds minimal load to any setup

Tailored for PD200X and PD200XS

This shock mount is built specifically for the Fender PD200X and PD200XS microphones. It fits microphones with a diameter of about 56mm or 2.2 inches. The aluminium construction weighs only 0.15 pounds. It targets streamers, podcasters and voice-over artists who need cleaner recordings.

Removable screw eases fitting

Installation uses a removable inner-ring screw that loosens, accepts the microphone, then tightens to the desired strength. The adjustable ring prevents loosening during use. The mount accepts a 3/8" to 5/8" adapter (not included) for stand attachment. No tools beyond the integrated screw are required.

Check microphone diameter and stand thread

Verify your microphone measures roughly 56mm across before ordering. Ensure your stand or boom offers a compatible thread or that you own a 3/8" to 5/8" adapter. The mount adds 14.33in width, 12.83in height and 9.06in depth to your setup. Buyers needing a different diameter or integrated pop filter should look elsewhere.

Highlights

  • Removable inner-ring screw secures 56 mm microphones without loosening
  • Double-layer shock-absorbing rings and rubber bands suppress vibration and handling noise
  • Stable aluminium frame keeps recordings clear during streaming, podcasting or voice work
  • 3/8″ to 5/8″ adapter compatibility fits most boom arms and mic stands
  • Lightweight aluminium build at 0.15 lb adds minimal load to any setup

Specifications

BrandFender
ModelPD200
MaterialsAluminum
SpecificationAluminum, Matte, 0.15 pounds, 3.5052 L x 10.2108 W x 15.494 H centimeters
Dimension14.33in W x 12.83in H x 9.06in D
Weight0.15 pounds

Questions about this item

How do I confirm the PD200 shock mount is working correctly after setup?

Mount the PD200X or PD200XS microphone inside the 56mm inner ring, tighten the removable screw, then tap the stand lightly. Recorded audio should show no mechanical rumble or handling noise, confirming the double-layer rubber bands are absorbing vibration.

What comes in the box and what must I buy separately?

The box contains the PD200 aluminium shock mount with adjustable inner ring and rubber suspension bands. A 3/8" to 5/8" screw adapter for attaching to microphone or boom stands is not included and must be purchased separately.

Which version should I choose for my PD200X or PD200XS microphone?

This single PD200 model fits both the PD200X and PD200XS microphones. Its inner ring adjusts to the 56mm / 2.2-inch diameter shared by those models, so no other version or capacity option exists.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.