Deejay LED
Deejay LED Adjustable Speaker Level to RCA Output Converter TBHHITOLOW
$27.99
0.00032878BTC
In stock
Fender M-S600 Headphone Stand 2 Pack Black
Two adhesive headphone hooks hold headsets on any smooth surface and fold away magnetically when not needed
- TypeOther
- FinishBlack
- MaterialsPlastic
- SpecificationPlastic, Black, 3.94 L x 0.65 W x 5.31 H inches, 0.109 kilog
- Dimension14.33in W x 12.83in H x 9.06in D
- Weight0.109 kilograms
- Foldable arm with magnet stores headphones compactly when not in use
- Nano adhesive mounts on smooth surfaces without drilling or tools
- Silicone pads on hook and base prevent scratches and slipping on headbands
- Two stands included for organising multiple headsets on desk or wall
- Press firmly for 30 seconds then wait 24 hours before hanging headphones
Fender M-S600 headphone stand pair
This two-pack provides adhesive-mounted holders for a pair of headphones or headsets. The foldable arms collapse flat against the wall or desk when not in use, keeping workspaces clear. Each unit uses a nano adhesive that bonds to smooth surfaces such as glass, metal, wood or marble without drilling. Installation requires firm pressure for thirty seconds and a full twenty-four hour cure before any weight is applied.
Thermals noise and power draw
As a passive plastic accessory the stands generate no heat, produce no audible noise and draw zero electrical power. The lightweight construction adds only 0.109 kilograms per unit to the mounting surface. Normal use is completely silent and places no demand on a power supply or thermal budget. The adhesive bond remains stable at typical indoor temperatures.
Foldable arm and silicone pads
A built-in magnet holds each arm securely in the folded position until it is pulled open with one hand. Soft silicone pads on both the hook and base prevent scratches, slipping and pressure marks on headband surfaces. The adhesive backing is single-use; it cannot be repositioned once cured and is not recommended for painted or textured walls. No tools, screws or additional hardware are required.
Highlights
- Foldable arm with magnet stores headphones compactly when not in use
- Nano adhesive mounts on smooth surfaces without drilling or tools
- Silicone pads on hook and base prevent scratches and slipping on headbands
- Two stands included for organising multiple headsets on desk or wall
- Press firmly for 30 seconds then wait 24 hours before hanging headphones
Specifications
| Brand | Fender |
|---|---|
| Model | M-S600 |
| Part Number | M-S600 |
| Type | Other |
| Finish | Black |
| Materials | Plastic |
| Specification | Plastic, Black, 3.94 L x 0.65 W x 5.31 H inches, 0.109 kilograms, Wall Mount, MANMUVIMO, M-S600 |
| Dimension | 14.33in W x 12.83in H x 9.06in D |
| Weight | 0.109 kilograms |
Questions about this item
How do I install the M-S600 stands and what step do people often skip?
Peel the adhesive backing, press firmly on a smooth surface like glass, metal, wood or marble for 30 seconds, then wait 24 hours before hanging any headphones. Skipping the cure time causes the bond to fail.
What maintenance will the adhesive mounts need over time?
The nano adhesive is designed for a permanent bond; no routine maintenance is required. If a stand must be moved, the adhesive cannot be reused and a replacement mount would be needed.
What is the first limit you hit when leaving heavy headphones on the stand for weeks?
The adhesive bond is the limiting factor. It only holds on perfectly smooth, non-painted surfaces, and exceeding the surface requirements or skipping the 24-hour cure will cause the stand to detach.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Gator Cases
Gator Cases Cable Accessory Pack 8 cables 2.1 mm 3.5 mm 20 inch
$27.99
0.00032878BTC
In stock