Fein
Fein Disc Backup Pad 6 in 8 Hole 3-14-26-030-00-5
Six-inch hook-and-loop backup pad with eight vacuum holes for Fein MF 636 sanders
- TypeSanders
- Weight0.1
- MaterialHAWA
- Hook-and-loop face enables quick disc changes
- Eight vacuum holes extract dust for cleaner air
- Medium-density foam gives consistent finish pressure
- 5 7/8 in diameter fits Fein MF 636 sanders
- Lightweight 0.1 kg design reduces operator fatigue
Disc Backup Pad for Fein MF 636
This 6-inch round backup pad uses a hook-and-loop abrasive mount and is built to work with the Fein MF 636 sander. It weighs 0.1 kg and has a medium-density HAWA body with eight vacuum holes for dust extraction. The pad accepts 6-inch discs and fits the tool without adapters.
Medium density sustains even sanding pressure
Under continuous use the medium-density construction keeps the abrasive surface flat so material removal stays consistent across the workpiece. The eight vacuum holes pull dust away from the contact area, preventing loading that would otherwise reduce cut rate over time. Heat builds slowly because the pad mass is small and airflow reaches the backing directly.
Hook-and-loop limits disc changes to compatible
The quick-change system is not applicable, so discs must use the hook-and-loop face; adhesive-backed or bolt-on abrasives will not mount. Maximum and minimum face-plate diameters are both 6 inches, meaning only 6-inch discs fit — larger or smaller sizes cannot be used. Eight vacuum holes match the sander’s dust port pattern; mismatched hole patterns will lose suction.
Highlights
- Hook-and-loop face enables quick disc changes
- Eight vacuum holes extract dust for cleaner air
- Medium-density foam gives consistent finish pressure
- 5 7/8 in diameter fits Fein MF 636 sanders
- Lightweight 0.1 kg design reduces operator fatigue
Specifications
| Type | Sanders |
|---|---|
| Weight | 0.1 |
| Brand | Fein |
| Model | 3-14-26-030-00-5 |
| Material | HAWA |
Questions about this item
How much does the 0.1 kg backup pad add to the sander's vibration during all-day use?
The pad weighs 0.1 kg and uses a medium-density HAWA construction with eight vacuum holes to help balance the sander and reduce heat buildup during extended sanding sessions.
Which sander model must I already own for the 3-14-26-030-00-5 pad to fit?
The pad is designed for the Fein MF 636 sander and accepts a 6 in hook-and-loop disc, so you need that sander model for it to work.
Will the 6 in 8-hole pad align with the dust extraction on my older Fein sander?
The pad's eight vacuum holes match the MF 636's dust port pattern, and its 5 7/8 in diameter fits the 6 in face plate, so it works with that specific older model.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
