Feekoon 2-in-1 E26/E27 Light Socket to 3-Outlet Plug Adapter
Converts an E26 or E27 light socket into three grounded outlets with flexible 4-inch cords and a 10 A fuse
- Amps1250 watts
- Compatibility/FitmentDC-Feekoon-0086, Feekoon-Convert-0086
- Converts E26 or E27 bulb sockets into three AC outlets
- Accepts both two-prong and three-prong plugs without extra adapters
- Four-inch flexible cords on each outlet allow angled connections
- Flame-retardant PVC rated to 105 °C with built-in 10 A fuse
- Suitable for indoor and outdoor low-power devices up to 1250 W
Socket-to-outlet converter for E26/E27 fixtures
This adapter screws into a standard E26 or E27 lamp holder and provides three grounded outlets, each on a four-inch flexible cord. It accepts both two-prong and three-prong plugs, removing the need for a separate grounding adapter. The unit is rated for 125 V AC at 10 A, with a built-in fuse that interrupts the circuit if current exceeds that limit. Flame-retardant PVC rated to 105 °C forms the housing.
Replaces temporary power strips or extension leads
The device adds outlets directly at the light socket, which is useful where wall receptacles are scarce, such as garages, basements, workshops or utility rooms. The jump is worthwhile when you need a few low-power connections close to an existing fixture and can stay within the 10 A fused limit. It is not suited for high-draw appliances or permanent installations that require dedicated branch circuits.
Limited by lamp-holder rating
The adapter draws power through the lamp holder, so the fixture’s own wiring and contact rating become the practical ceiling. Continuous loads near 10 A will trip the internal fuse, and the 1250 W maximum applies only to resistive loads on a suitable circuit. Outdoor use is possible for low-power seasonal lighting, but the assembly is not a substitute for weatherproof, hard-wired outlet boxes.
Highlights
- Converts E26 or E27 bulb sockets into three AC outlets
- Accepts both two-prong and three-prong plugs without extra adapters
- Four-inch flexible cords on each outlet allow angled connections
- Flame-retardant PVC rated to 105 °C with built-in 10 A fuse
- Suitable for indoor and outdoor low-power devices up to 1250 W
Specifications
| Amps | 1250 watts |
|---|---|
| Compatibility/Fitment | DC-Feekoon-0086, Feekoon-Convert-0086 |
Questions about this item
Will the E26 or E27 base fit my existing light fixture?
The adapter accepts both E26 and E27 screw bases, so it fits standard household lamp sockets without modification.
How do I install it and what step do people miss?
Screw the adapter into the lamp holder, then plug devices into the three outlets; the step often missed is confirming the total load stays under 10 A so the internal fuse does not trip.
What part will need replacement if the fuse blows from overload?
The built-in fuse is not user-replaceable; if it opens due to sustained current above 10 A, the whole adapter must be replaced.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
