Federal Pacific
Federal Pacific UBIF015N Miniature Circuit Breaker 15A 1 Pole
A 15 A single-pole miniature circuit breaker rated 120 V AC with a 10 kA interrupting capacity, plug-in mounting and toggle actuation for compatible Federal Pacific load centres
- Reliable 15 A protection for 120 V AC circuits
- 10 kA interrupting rating handles high fault currents safely
- Plug-in mounting fits Federal Pacific X125-0816C load centres
- Single-pole toggle actuator provides clear on/off control
- Compact 3.4 in × 0.5 in frame saves panel space
Federal Pacific 15A Miniature Circuit Breaker
The Federal Pacific UBIF015N is a single-pole miniature circuit breaker rated at 15 amps for 120V AC systems. It features a plug-in mounting style with a toggle actuator and lug terminal connections. Designed for Federal Pacific X125-0816C load centres, it provides standard branch-circuit overcurrent protection with a 10kA interrupting rating at 120V AC. The unit measures 3.4 in length, 0.5 in width and 2.6 in depth.
Suits Federal Pacific load centres needing 15A
This breaker suits electricians and facility managers maintaining Federal Pacific load centres that require a 15A single-pole device with plug-in installation. It is not suitable for panels from other manufacturers or for applications needing multi-pole configurations. Buyers requiring DC voltage ratings or higher interrupting capacities should look at alternative devices. The minimum operating temperature is 0 degrees F.
10kA interrupting rating at 120V AC
The decisive specification is the maximum AIR rating of 10kA at 120V AC, which determines whether this breaker can safely interrupt prospective fault currents in the target installation. This rating must meet or exceed the calculated available fault current at the point of application. The 60A frame size and single-phase design are fixed characteristics of the UBIF series.
Highlights
- Reliable 15 A protection for 120 V AC circuits
- 10 kA interrupting rating handles high fault currents safely
- Plug-in mounting fits Federal Pacific X125-0816C load centres
- Single-pole toggle actuator provides clear on/off control
- Compact 3.4 in × 0.5 in frame saves panel space
Specifications
| Brand | FEDERAL PACIFIC |
|---|
Questions about this item
Will the 3.4 in length and .5 in width fit my Federal Pacific X125-0816C load center?
Yes, the breaker is built for the X125-0816C series; its 3.4 in length and .5 in width match the plug-in mounting slots on that panel.
How do I install the plug-in breaker, and what step is often missed?
Snap the toggle actuator into the panel bus until it seats firmly, then tighten the terminal lug on the load conductor; the step often missed is verifying the lug is torqued on the wire.
When should I replace the 15 A UBIF breaker?
Replace it if the toggle trips repeatedly under normal 15 A load, shows scorch marks on the lug, or fails to reset after a confirmed 10 kA fault event.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
