We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black Y-shaped 9-pin splitter cables with female-to-dual-male connectors

FdcLixuvol 5149XNVK2336 9-pin power splitter cord 2-pack 1 female to 2 male black

SKU CH-WT58-JN84H

Two black 9-pin Y-splitters extend front-panel headers with 13 cm arms and 17 cm total length

  • Connector Detail1 Female to 2 Male
  • Specifications6.69 L x 5.11 W x 0.5 H inches, 0.5 ounces
  • Construction9-pin
  • Disclaimernot_applicable
  • Extends front-panel header reach with 17 cm Y-cable
  • Tinned copper conductors and PVC insulation rated to 70°C
  • Two parallel 9-pin outputs for power and reset switches
  • Clearly labelled ports simplify case-wire connections
  • Adapts legacy case wiring to modern motherboard headers

9-Pin Motherboard Jumper Splitter

This 9-pin motherboard jumper splitter connects one female header to two male plugs. It extends the reach of front-panel headers so power switch, reset switch and LED wires can be routed cleanly inside the case. The Y-shaped cable measures about 13 cm per branch with a total length of roughly 17 cm. Two pieces are included in the pack.

Dual Parallel Output Ports

Each splitter provides two parallel ports so multiple switches can share a single motherboard header. The manufacturer advises against using both LED ports at the same time. Ports are clearly labelled to reduce wiring mistakes during assembly. The adapters also help connect scattered wires from older cases to newer boards through one simple header plug.

PVC-Insulated Tinned Copper Construction

Conductors use 7/0.12TS tinned copper with PVC insulation and an outer diameter of 1.2 mm. The assembly is rated for 70 °C operating temperature. The Y-shaped layout fixes the branch spacing, so header positions farther apart than the supplied lengths cannot be bridged without additional cable.

Highlights

  • Extends front-panel header reach with 17 cm Y-cable
  • Tinned copper conductors and PVC insulation rated to 70°C
  • Two parallel 9-pin outputs for power and reset switches
  • Clearly labelled ports simplify case-wire connections
  • Adapts legacy case wiring to modern motherboard headers

Specifications

BrandFdcLixuvol
Model5149XNVK2336
Connector Detail1 Female to 2 Male
Specifications6.69 L x 5.11 W x 0.5 H inches, 0.5 ounces
Construction9-pin
Disclaimernot_applicable

Questions about this item

Will the PVC insulation on the 1.2 mm OD cable degrade after long exposure to 70°C inside the case?

The cable is rated to 70°C, so continuous operation at or below that temperature should not cause premature insulation breakdown.

How many front-panel switches can I safely run from one 9-pin splitter without overloading the header?

Each splitter provides two parallel output ports; the supplier advises against using both LED ports at the same time to avoid excessive current draw.

Does the Y-shaped cable run warm when both power and reset switches are used all day?

The tinned-copper conductors and PVC insulation are rated for 70°C, so normal front-panel switching loads produce negligible heat rise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.