We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
FASCO D727 direct drive blower motor 1/3 HP 115V

FASCO

FASCO D727 1/3 HP 115V Direct Drive Blower Motor

SKU CH-KFK5-K6T2A

Direct-drive blower motor delivers three-speed, 1/3 hp airflow at 115 V for ceiling-fan installations

  • typeMotors
  • Three-speed operation adapts airflow to the room
  • 1/3 hp permanent split capacitor motor delivers 250 W output
  • 115 V AC single-phase power suits standard household wiring
  • Auto thermal protection guards against overheating up to 40 °C
  • Reversible CW/CCW rotation fits multiple mounting orientations

FASCO D727 Blower Motor Overview

The FASCO D727 is a 1/3 HP direct-drive blower motor designed for ceiling fan applications. It operates on 115V AC single-phase power at 60 Hz with a permanent split capacitor design. The motor delivers three-speed operation at a nameplate RPM of 1,075 and provides 250 W output. It features a 48 frame size and auto thermal protection for continuous duty cycles.

Electrical Compatibility Check

Verify that your supply voltage is 115V AC, as the motor is not usable at 200V or 208V. Confirm the circuit can handle the full-load amp draw of 5.9 A on high speed, 4.6 A on medium, or 3.8 A on low. Ensure the existing capacitor matches the permanent split capacitor design and that wiring supports reversible CW/CCW rotation. The motor requires a maximum ambient temperature of 40 degrees C.

Installation and Build Integration

The open drip-proof enclosure requires a mounting location protected from direct moisture while allowing airflow for cooling. The 48 frame dimensions dictate the mounting footprint and shaft alignment with the fan assembly. Direct-drive design eliminates belt maintenance and frees up space otherwise needed for pulleys or tensioners. Auto thermal protection adds safety during extended continuous operation.

Highlights

  • Three-speed operation adapts airflow to the room
  • 1/3 hp permanent split capacitor motor delivers 250 W output
  • 115 V AC single-phase power suits standard household wiring
  • Auto thermal protection guards against overheating up to 40 °C
  • Reversible CW/CCW rotation fits multiple mounting orientations

Specifications

BrandFASCO
typeMotors

Questions about this item

Does the FASCO D727 motor come with a capacitor and mounting hardware, or do I need to buy them separately?

The motor is a permanent split capacitor design that requires a run capacitor matched to the 1/3 hp, 115 V, 48-frame rating. Mounting hardware is not included and must be sourced separately.

How do I decide between the 1/3 hp, 1/4 hp and 1/5 hp ratings shown on the nameplate?

The three horsepower ratings correspond to the three speed taps. High speed delivers 1/3 hp at 5.9 A, medium 1/4 hp at 4.6 A, and low 1/5 hp at 3.8 A. Choose the tap that matches the airflow and current draw your application requires.

What does the 1,075 RPM nameplate speed mean once the motor is installed in my blower?

At 115 V and 60 Hz the motor runs at 1,075 RPM on high speed under full load. Actual speed will vary slightly with load and voltage, but the 1/3 hp, 250 W output is rated for continuous duty at up to 40 °C ambient.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.