We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small steel HVAC motor with closed base and stud mount

FASCO

FASCO D601 1/50 HP 1500 rpm 115V 3.3 Frame Fan Accessory

SKU CH-QW1E-DRCRZ

Single-phase shaded-pole motor delivers 1/50 hp at 1500 rpm on 115 V AC with a 3.3 frame and auto thermal protection

  • typeClosed Base
  • Shaded-pole design for simple single-speed operation
  • 1/50 HP output delivers 10 watts of power
  • 1500 RPM nameplate speed suits HVAC airflow needs
  • 115 V AC input with 0.9 amp full-load draw
  • Totally enclosed air-over enclosure rated for 40 °C ambient

Motor Specifications

This FASCO D601 is a shaded-pole fan and blower motor rated at 1/50 hp with a nameplate speed of 1500 rpm. It operates on 115V AC single-phase power at 60 Hz and draws 0.9 A at full load. The motor delivers 10 W output and uses a 3.3 frame size.

Installation Requirements

The totally enclosed air-over enclosure requires airflow from the driven fan for cooling and must operate within a 40 °C maximum ambient temperature. A CCWSE shaft rotation and stud mounting pattern are built in, so the driven component and mounting surface must match this orientation. Auto thermal protection and Class B insulation are integrated, and the motor is not usable at 200 V or 208 V.

Target Applications

This accessory suits maintenance technicians replacing an exact-match HVAC motor in residential or light-commercial equipment that specifies a 1/50 hp, 115 V shaded-pole unit with a 3.3 frame. It does not suit installers who need multi-speed operation, reversible rotation, higher horsepower, or compatibility with 200 V and 208 V supplies.

Highlights

  • Shaded-pole design for simple single-speed operation
  • 1/50 HP output delivers 10 watts of power
  • 1500 RPM nameplate speed suits HVAC airflow needs
  • 115 V AC input with 0.9 amp full-load draw
  • Totally enclosed air-over enclosure rated for 40 °C ambient

Specifications

BrandFASCO
typeClosed Base

Questions about this item

What is the maximum ambient temperature the 1/50 hp shaded-pole motor can tolerate under continuous operation?

The motor is rated for a maximum ambient temperature of 40 degrees Celsius with automatic thermal protection.

What are the full-load current and power draw when the motor runs all day at 1500 rpm?

It draws 0.9 amps at 115 volts AC and produces 10 watts of output power.

What voltage supply and mounting hardware are required to install this 3.3 frame motor?

It requires a 115 volt AC 60 Hz supply and mounts via studs on its steel frame.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.