FASCO
FASCO D208 HVAC Motor 1/30 HP 3000 rpm 115V 3.3 Frame
Single-phase shaded-pole motor delivers 1/30 hp at 3000 rpm on 115 V AC with a 3.3 frame and auto thermal protection
- typeClosed Base
- 1/30 HP shaded-pole motor delivers 20 W output power
- 3000 RPM single-speed operation suits HVAC fan and blower duty
- 115 V AC at 1.0 A full-load current for standard residential wiring
- 3 frame with steel construction and stud mounting fits common replacements
- Auto thermal protection and Class B insulation rated for 40 °C ambient
HVAC motor for shaded-pole replacement
The FASCO D208 is a single-phase shaded-pole motor rated at 1/30 hp and 3000 rpm. It delivers 20 W output at 115 V AC and draws 1.0 A full-load current. The 3.3 frame steel body uses a stud mounting pattern and runs clockwise from the shaft end.
Voltage and frame compatibility check
Verify that the supply is 115 V AC at 60 Hz; the motor is not usable at 200 V or 208 V. Confirm the existing mounting studs match the 3.3 frame dimensions and that the driven shaft rotates CWSE. Ensure the ambient temperature will not exceed 40 degrees C.
Open air-over enclosure needs airflow
The open air-over design requires a continuous stream of cooling air from the blower or fan it drives. Auto thermal protection and Class B insulation guard against overload. The 1.0 service factor means no extra margin beyond nameplate load, so the motor must operate within its rated 20 W output.
Highlights
- 1/30 HP shaded-pole motor delivers 20 W output power
- 3000 RPM single-speed operation suits HVAC fan and blower duty
- 115 V AC at 1.0 A full-load current for standard residential wiring
- 3 frame with steel construction and stud mounting fits common replacements
- Auto thermal protection and Class B insulation rated for 40 °C ambient
Specifications
| Brand | FASCO |
|---|---|
| type | Closed Base |
Questions about this item
Does the FASCO D208 motor come with a capacitor or mounting hardware, or must those be purchased separately?
The motor is supplied as a single unit with a steel frame and stud mounting; no capacitor or additional hardware is included in the box.
Should I choose a shaded-pole motor like the D208 or a different motor type for my 1/30 HP 115 V application?
The D208 is a single-speed shaded-pole motor rated at 1/30 HP and 115 V; select it when the original equipment specifies shaded-pole, 3000 RPM, and a 3.3 frame.
Will the motor deliver its full 20 W output and 1.0 A draw when installed in a typical HVAC blower?
Yes, at 115 V AC and 60 Hz the motor produces 20 W at 3000 RPM with a 1.0 A full-load current, provided ambient temperature stays at or below 40 °C.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



