We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact steel HVAC motor with open vents and stud mounting

FASCO

FASCO D189 HVAC Motor 1/20 HP 1500 rpm 230V 3.3 Frame

SKU CH-XN2S-W3283

A shaded-pole HVAC motor delivering 1/20 hp at 1500 rpm on 230 V with a 3.3 frame and auto thermal protection

  • typeClosed Base
  • 1/20 HP motor delivers reliable HVAC airflow
  • 1500 RPM single-speed operation suits consistent duty
  • 230 V AC supply matches standard residential wiring
  • 3 frame steel construction fits compatible mounts
  • Auto thermal protection safeguards motor during overload

Motor type and voltage

This FASCO D189 is a single-phase shaded-pole motor rated at 1/20 hp and 230 V AC. It is designed for HVAC fan and blower applications that require a 3.3 frame open air-over enclosure.

Power output and voltage limits

The motor delivers 40 W at 1,500 rpm with a full-load draw of 0.9 A. It is not usable at 208 V or 200 V, so the supply must stay at the rated 230 V for reliable operation.

Rotation and mounting constraint

The shaft turns counter-clockwise when viewed from the shaft end and mounts via a stud pattern on a closed steel base. Verify that the driven fan requires CCWSE rotation and stud mounting before ordering.

Highlights

  • 1/20 HP motor delivers reliable HVAC airflow
  • 1500 RPM single-speed operation suits consistent duty
  • 230 V AC supply matches standard residential wiring
  • 3 frame steel construction fits compatible mounts
  • Auto thermal protection safeguards motor during overload

Specifications

BrandFASCO
typeClosed Base

Questions about this item

Will the 3.3 frame and stud mounting let me reuse my existing blower housing?

The motor uses a 3.3 frame with stud mounting; match those dimensions and the CCWSE shaft rotation to your current housing before installing.

How do I confirm the motor is running at the correct 1500 rpm after wiring it to 230 V?

Measure shaft speed with a tachometer; it should read 1500 rpm while drawing about .9 A at full load.

Does the box include a capacitor or mounting brackets, or must I buy them separately?

The motor ships as a bare unit with a closed base; no capacitor, brackets, or wiring harness are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.