FASCO
FASCO D122 HVAC Motor 1/80 HP 1500 rpm 115V 3.3 Frame
Single-phase shaded-pole HVAC motor delivers 1/80 HP at 1500 RPM on 115 V AC with 0.60 A full-load current in a 3.3 steel frame
- typeClosed Base
- Runs at 1500 rpm for steady airflow
- 1/80 HP output matches small HVAC needs
- Auto thermal protection prevents overheating damage
- 115 V AC single-phase suits residential wiring
- Totally enclosed air-over design resists dust buildup
HVAC Shaded-Pole Motor 1/80 HP 1500 RPM
This FASCO D122 is a single-phase shaded-pole motor rated at 1/80 HP and 1500 RPM. It operates on 115 V AC at 60 Hz and draws 0.60 A at full load. The 3.3 frame uses a closed-base steel construction with stud mounting.
Direct replacements for small ventilation units
It suits technicians replacing a failed motor in residential HVAC blowers, range hoods or draft inducers that require a 3.3 frame and clockwise shaft rotation. Installations needing 208 V or 200 V supply, reversible rotation, or higher output power cannot use this unit.
115 V only — not usable at 208 V or 200 V
The nameplate explicitly states the motor is not usable at 208 V or 200 V. Verify the supply voltage matches 115 V AC before purchase; no dual-voltage wiring option exists.
Highlights
- Runs at 1500 rpm for steady airflow
- 1/80 HP output matches small HVAC needs
- Auto thermal protection prevents overheating damage
- 115 V AC single-phase suits residential wiring
- Totally enclosed air-over design resists dust buildup
Specifications
| Brand | FASCO |
|---|---|
| type | Closed Base |
Questions about this item
Will the 1/80 hp motor overheat if it runs continuously at 1500 rpm?
The motor has automatic thermal protection and a Class B insulation rating for a maximum ambient temperature of 40 degrees C, so it will shut down before overheating under normal conditions.
How loud and how much power does the 115V shaded-pole motor draw during all-day operation?
It draws 0.60 amps at 115 volts for about 10 watts output, and the totally enclosed air-over design keeps noise low while the frame stays cool.
What mounting hardware and voltage supply do I need to install this 3.3 frame motor?
You need a 115V AC single-phase supply and stud-mount brackets that match the 3.3 steel frame; the motor shaft rotates clockwise when viewed from the shaft end.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



