FASCO
FASCO D1107 Condenser Fan Motor 1/10 HP 115V
Single-phase shaded-pole condenser fan motor delivering 1/10 HP at 115 V AC, 550 RPM, 3.2 A full-load current, with automatic thermal protection and band mounting for Nutone 6717 replacement
- MaterialHAWA
- Weight4.84
- 1/10 HP motor delivers reliable condenser airflow
- 115 V single-phase shaded-pole design runs on standard supply
- Auto thermal protection shuts down at 40 °C ambient
- Band mounting with CCWSE rotation fits Nutone 6717 replacements
- Open air-over steel frame weighs 4.84 kg for durable service
Application Fit
The FASCO D1107 is a shaded-pole condenser fan motor rated at 1/10 HP for 115 V AC single-phase supply. It suits HVAC technicians and maintenance teams replacing OEM units in residential or light-commercial air-handling equipment.
Deciding Specification
The nameplate speed is 550 RPM at 60 Hz with a full-load draw of 3.2 A and a 1.0 service factor. The motor is not usable at 200 V or 208 V, so it must be installed on a 115 V circuit only.
Installation Notes
Band mounting and a 3.3 in frame simplify the swap, while CCWSE shaft rotation must match the original fan blade. Auto thermal protection and Class B insulation handle normal ambient temperatures up to 40 °C.
Highlights
- 1/10 HP motor delivers reliable condenser airflow
- 115 V single-phase shaded-pole design runs on standard supply
- Auto thermal protection shuts down at 40 °C ambient
- Band mounting with CCWSE rotation fits Nutone 6717 replacements
- Open air-over steel frame weighs 4.84 kg for durable service
Specifications
| Material | HAWA |
|---|---|
| Weight | 4.84 |
| Brand | FASCO |
Questions about this item
What does the 1/10 HP rating mean for airflow in my condenser unit?
The motor produces one-tenth of a horsepower at 550 RPM, turning the matched fan blade to move the volume of air the condenser was designed for.
How does the 115 V single-phase supply limit where I can install this motor?
It runs on standard 115 V AC at 60 Hz and draws 3.2 amps full load; it is not usable on 200 V or 208 V circuits.
What mounting hardware and shaft orientation do I need to fit the D1107?
The motor uses a band-mount steel frame, 3.3 inch frame size, and rotates CCWSE, so the bracket and blade must match that rotation and mounting pattern.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



