FASCO
FASCO A330 Blower 3200 RPM 1 Phase Direct Steel 1 Speed
Rectangular OEM blower for furnaces, 3200 RPM, 1-phase direct-drive, 208-230V AC, 0.55 A, 50/60 Hz, 400 °F max inlet temperature
- ColorTransparent
- Direct 3200 RPM operation delivers strong airflow
- 208-230 V single-phase power suits standard furnace wiring
- 55 A draw keeps energy use low
- Permanent split capacitor motor ensures reliable starts
- 400 °F inlet rating handles high-temperature furnace cycles
HVAC Blower for Furnace Replacement
The FASCO A330 blower serves as a direct replacement for Lennox furnace models. It operates on 208-230V AC single-phase power at 50/60 Hz and draws 0.55 A. The unit is built for new installations or service work where the original motor has failed.
Steel Housing with Wire Lead Connection
A steel blower wheel rated for 3200 RPM maximum speed mounts directly to the motor shaft. The permanent split capacitor motor carries Class B insulation and accepts inlet air up to 400 degrees Fahrenheit. Wire leads provide the electrical connection without a plug.
Replaces Lennox 69M3301 and 7062 Series
This blower substitutes for Lennox part numbers 69M3301, 7062-4083, 7062-4517, 7062-4608 and 7062-5546. The upgrade is worth it when the existing assembly shows bearing noise, reduced airflow or a failed capacitor. Builders needing a different inlet diameter or a multi-speed motor should look elsewhere.
Highlights
- Direct 3200 RPM operation delivers strong airflow
- 208-230 V single-phase power suits standard furnace wiring
- 55 A draw keeps energy use low
- Permanent split capacitor motor ensures reliable starts
- 400 °F inlet rating handles high-temperature furnace cycles
Specifications
| Brand | FASCO |
|---|---|
| Color | Transparent |
Questions about this item
What voltage and phase does the 208-230V AC blower motor require?
The permanent split capacitor motor runs on 208-230V AC single-phase power at 50/60 Hz and draws 0.55 A.
What are the inlet dimensions and mounting details for the steel blower housing?
The blower has a 5 in inlet diameter and a rectangular steel housing designed as a direct OEM replacement for Lennox furnaces.
How are the wire leads connected during installation, and what common step is missed?
Connect the supplied wire leads to the furnace control board per the wiring diagram; the step often missed is verifying the capacitor is correctly wired for the permanent split capacitor motor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
